Section Agr 1405.09 - Use of Security Seals(a) Service technicians shall affix a security seal to any adjustment mechanism: (1) At the time the device is being placed into commercial use for the first time;(2) When returning a device to commercial use after servicing, repairing or reconditioning it;(3) When a device is being tested for renewal of an owner's device license; and(4) When the seal has to be broken before an adjustment can be made.(b) A wire security seal shall be used when a device is equipped with means for applying a wire security seal.(c) When a device is not equipped with means for applying a wire security seal and another type of security seal must be used, the seal shall be a tamper proof seal sufficiently permanent to show its removal.(d) When a service technician crimps the lead or polypropylene portion of a security seal with the seal press, the lead or polypropylene portion of the seal shall show the serviceman's seal number.(e) The service technician may inscribe any letters or numbers onto the other side of the die press except that the letters "NH", "NHDA", "NHDAMF", and "WM" shall be reserved for the sole use by the division of weights and measures.(f) A pressure-sensitive paper seal shall show the following:(1) The name and address of the service agency that employs the service technician, if any;(2) The signature of the service technician and certificate of registration number; and(3) The date the device was tested and the seal affixed.N.H. Admin. Code § Agr 1405.09
(See Revision Note at chapter heading for Agr 1400) #7462, eff 3-21-01; ss by #9416, INTERIM, eff 3-13-09, EXPIRED: 9-9-09
New. #9639, eff 1-20-10
Amended by Volume XXXVII Number 50, Filed December 14, 2017, Proposed by #12424, Effective 12/1/2017, Expires 12/1/2027.