Nev. Admin. Code § 445B.579

Current through October 11, 2024

Section 445B.579 - Inspection of vehicle: Devices for emission control required

Any motor vehicle which is manufactured on or after January 1, 1981, and subject to inspection in accordance with the provisions of chapter 445B of NRS and the table set forth in NAC 445B.596, as a condition of compliance with the inspection, must have a catalytic converter, fuel inlet restricter, air injection system, exhaust gas recirculation system and fuel inlet cap if the motor vehicle was originally equipped by the manufacturer with such equipment. The equipment required by this section must be installed and appear to be properly operating in accordance with the specifications for emission control of the manufacturer of the motor vehicle.

Environmental Comm'n, Engine Emission Control Reg. § 3.7.5, eff. 1-10-78; § 3.8.1, eff. 1-10-78; A 12-20-79; § 3.16, eff. 12-20-79-NAC A by Environmental Comm'n & Dep't of Motor Veh. & Pub. Safety, 11-23-87, eff. 1-1-88; A by Dep't of Motor Veh. & Pub. Safety, 9-28-88; A by Environmental Comm'n, 12-26-89; A by Dep't of Motor Veh. & Pub. Safety by R079-98, 9-25-98; A by Dep't of Motor Veh. by R068-05, 6-1-2006, eff. 9-1-2006

NRS 445B.210, 445B.770, 445B.785