Section 445B.3361 - General requirements1. To establish a new Class I stationary source or modify an existing Class I stationary source, the owner or operator of a proposed new Class I stationary source or the existing Class I stationary source must:(a) Apply for and obtain a new or revised:(1) Operating permit to construct pursuant to NAC 445B.001 to 445B.3689, inclusive; or(2) Class I operating permit pursuant to NAC 445B.001 to 445B.3689, inclusive; and(b) If the owner or operator of the Class I stationary source operates a thermal unit that emits mercury, apply for and obtain a new or revised mercury operating permit to construct for the thermal unit that emits mercury and comply with the provisions set forth in NAC 445B.3611 to 445B.3689, inclusive.2. To establish a plantwide applicability limitation, the owner or operator of a Class I stationary source must apply for and obtain a Class I operating permit to construct for the approval of the plantwide applicability limitation pursuant to NAC 445B.001 to 445B.3689, inclusive. To revise or renew a Class I operating permit to construct for the approval of a plantwide applicability limitation, the owner or operator of a Class I stationary source must apply for and obtain a revised or renewed Class I operating permit to construct for the approval of a plantwide applicability limitation pursuant to NAC 445B.001 to 445B.3689, inclusive.3. Except as otherwise provided in subsection 5, if an owner or operator obtains an operating permit to construct, the owner or operator is not required to obtain an operating permit or revised operating permit before commencing initial construction, start-up and operation of the proposed new Class I stationary source or the modification to the existing Class I stationary source.4. Except as otherwise provided in this subsection and subsections 5 and 6, if an owner or operator has a valid operating permit to construct, the owner or operator may continue to operate a new Class I stationary source or modifications to an existing Class I stationary source under that operating permit to construct if the owner or operator submits a complete application for a Class I operating permit within 12 months after the date of initial start-up of the new Class I stationary source or modifications to the existing Class I stationary source. The provisions of this subsection do not apply to a Class I operating permit to construct for the approval of a plantwide applicability limitation.5. If the conditions of an existing Class I operating permit would prohibit the construction or change in operation of the existing Class I stationary source and the owner or operator is not seeking to revise the Class I operating permit at the Class I stationary source pursuant to subparagraph (2) of paragraph (a) of subsection 1, the owner or operator must concurrently: (a) For the construction or change in operation of the existing Class I stationary source: (1) Obtain a Class I operating permit to construct; or(2) If the construction or change in operation involves mercury emissions from a thermal unit that emits mercury, obtain a mercury operating permit to construct pursuant to NAC 445B.3611 to 445B.3689, inclusive; and(b) Obtain an administrative revision to an operating permit to incorporate the conditions of the Class I operating permit to construct into the existing Class I operating permit pursuant to NAC 445B.3441 before commencing with the construction or change in operation of the existing Class I stationary source.6. If an owner or operator has a valid mercury operating permit to construct, the owner or operator may continue to operate the thermal unit that emits mercury which is located at an existing Class I stationary source if the owner or operator submits a complete application to revise the existing Class I operating permit within 12 months after the determination of the NvMACT contained in the mercury operating permit to construct by the Director.7. As used in this section:(a) "Mercury emissions" has the meaning ascribed to it in NAC 445B.3623.(b) "Mercury operating permit to construct" has the meaning ascribed to it in NAC 445B.3625.(c) "NvMACT" has the meaning ascribed to it in NAC 445B.3629.(d) "Thermal unit that emits mercury" has the meaning ascribed to it in NAC 445B.3643.Nev. Admin. Code § 445B.3361
Added to NAC by Environmental Comm'n by R103-02, eff. 12-17-2002; A by R125-04, 9-24-2004; R189-05, 5-4-2006; R139-06 & R162-06, 9-18-2006; R040-10, 7-22-2010