A. All new boilers and hot water heaters, unless otherwise exempt, to be operated in this jurisdiction shall be designed, constructed, inspected, stamped and installed in accordance with the ASME Code and these rules and regulations. Boilers for which an ASME Manufacturer's Data Report is required shall bear the manufacturer's "NB" number as registered with the National Board. A copy of the Manufacturer's Data Report, signed by the manufacturer's representative and the National Board Commissioned authorized inspector, shall be filed with the National Board and with the chief inspector of the jurisdiction. A copy of the Manufacturers/Installing Contractor Report for ASME CSD-1 shall be filed with the chief inspector of the jurisdiction.B. All new pressure vessels, unless otherwise exempt, to be operated in this jurisdiction shall be designed, constructed, inspected, stamped and installed in accordance with the ASME Code and these rules and regulations. Pressure vessels for which an ASME Manufacturer's Data Report is required shall bear the manufacturer's "NB" number as registered with the National Board. A copy of the Manufacturer's Data Report, signed by the manufacturer's representative and the National Board Commissioned authorized inspector, shall be filed with the National Board. A copy of the ASME Manufacturer's Data Report, signed by the manufacturer's representative and the authorized inspector, shall be submitted to the chief inspector of the jurisdiction.229 Neb. Admin. Code, ch. 2, § 002
Amended effective 8/7/2016.