229 Neb. Admin. Code, ch. 17, § 002
Current through September 17, 2024
Upon completion of the installation of a boiler or pressure vessel, or at the time of the initial Certificate inspection of an existing installation, each boiler or pressure vessel shall be identified by a number unique to that item. Stamping of the state serial number in the base metal of the unit shall only be done if the original code of construction allows stamping of the base metal for the actual thickness or material of the metal used in the construction of the unit. As an alternative to stamping, boilers or pressure vessels may have a corrosion- resistant metal tag or some other type of labeling device acceptable to the Commissioner attached in the proximity of or by the original nameplate.
229 Neb. Admin. Code, ch. 17, § 002