The permit application for a construction and demolition waste disposal area shall include the following maps and drawings, and shall be prepared by a professional engineer registered to practice in the State of Nebraska. When a structure described in 007.03 and 007.04 is not present at the site, a notation shall be made on the required map or drawing.
007.01 A topographic map or maps of the construction and demolition waste disposal area drawn to the scale of 200 feet to the inch or larger, containing 5-foot contour intervals where the relief exceeds 20 feet, and 2-foot contour intervals where the relief is 20 feet or less, and referred to a United States Geological Survey datum.007.02 A topographic map indicating the proposed final contours and landscaping of completed solid waste disposal areas with a statement of the proposed final use of the site.007.03 Maps of the site, drawn to scale, indicating the location or existence of the following items: 007.03A Points of entrance to and exit from the facility and to and from the operating area of the facility; devices for controlling unauthorized access to the facility site;007.03B Loading, dumping and any temporary storage areas;007.03C Interior roads and ramps;007.03D Salvage operations;007.03G Drainage facilities, structures, walls, cribbing, surface protection devices, and any other devices as are necessary to comply with applicable water quality standards; and007.03H If present, the following: fire protection facilities, utilities to service the site, gas and oil wells, high tension power lines, and fuel transmission pipelines.007.04 Maps of the area within one-quarter mile of the boundaries of the site, drawn to scale, showing the location of:007.04A Waterways and surface drains;007.04B Nearby surface waters;007.04C Borings, wells, springs, and their surface elevations, and depths and elevations of water levels;007.04D Field tile drains; and007.04E Underground and surface mines, elevations of mine pools, and mine pool discharges.132 Neb. Admin. Code, ch. 5, § 007
Amended effective 5/17/2016.