Rule 23.3.953 - DEFINITIONS The following definitions apply throughout this chapter:
(1) "Certificate holder" means the manufacturer or vendor who the department has issued a certificate authorizing the use of a particular IID, or a manufacturer or vendor to install, service, calibrate, remove, and monitor certified IIDs.(2) "Circumvention" means the attempted or successful bypass of an ignition interlock device (IID), including but not limited to: (a) operating a vehicle without a properly functioning IID;(b) disconnecting any part of the IID including the control head while the vehicle is in operation;(d) introducing any breath sample from an air compressor, manual air pump, or other mechanical device to start, attempt to start, or operate a vehicle equipped with an IID;(e) introducing a breath sample from someone who is not the restricted driver;(f) introducing any altered, diluted, contaminated, stored, or filtered breath sample; (g) intentionally disrupting or blocking a digital image identification device;(h) operating the interlock vehicle after the IID detects excess breath alcohol.(3) "Manufacturer" means the person, company, or corporation responsible for the design, construction, and/or production of the IID. (4) "Manufacturer representative" means an individual designated to act on behalf of and/or represent the manufacturer in all matters relating to the IID certification process, compliance, and reporting requirements with the department.(5) "Service center" means a location where certified IIDs are serviced, installed, and removed.(6) "Tampering" means any act or attempt to disable or circumvent the operation of an IID.(7) "Vendor" means a person or entity designated by the manufacturer to conduct business on behalf of the manufacturer.(8) "Vendor representative" means an individual designated by the vendor as a contact for the department.(9) "Violation reset" means a driver had a violation requiring an unscheduled service of the IID.NEW, 2018 MAR p. 589, Eff.3/17/2018; AMD, 2023 MAR p. 411, Eff. 4/29/2023AUTH: 61-8-1025, MCA; IMP: 61-8-1025, MCA