Mo. Code Regs. tit. 10 § 45-8.010

Current through Register Vol. 49, No. 23, December 2, 2024

Section 10 CSR 45-8.010 - General

PURPOSE: This rule amendment follows the review conducted pursuant to Executive Order 17-03. The amendment proposes to remove language that repeats statute or is obsolete.

(1) The closure and inspection-maintenance plans shall establish and explain the technical processes and steps proposed to accomplish and maintain closure. Issues expected to be addressed shall include, but should not be limited to:

(A) The design, construction, and maintenance of waste control structures, tailings dams, waste stockpiles, and supporting facilities;

(B) The characterization of waste products;

(C) The methods for control and protection of surface water;

(D) The methods for protection of groundwater and aquifers;

(E) The geology and seismicity of the area;

(F) The potential for subsidence;

(G) The reuse and off-site removal of wastes; and

(H) The surface reclamation of waste management areas.

(2) Consistent with section 444.362, RSMo and 10 CSR 45-6.020, the owner/operator shall comply with the appropriate technical requirements, standards, and guidelines published in the rules of other state and federal environmental programs. Supplemental guidelines for preparation, review, and approval of closure and inspection-maintenance plans are-

(A)10 CSR 45-8.020 Groundwater Protection;

(B)10 CSR 45-8.030 Metallic Minerals Waste Management Control Structures; and

(C)10 CSR 45-8.040 Reclamation-Reuse.

10 CSR 45-8.010

AUTHORITY: sections 444.362 and 444.380, RSMo Supp. 1989.* Original rule filed Oct. 2, 1990, effective 4/29/1991.

Amended by Missouri Register October 15, 2018/Volume 43, Number 20, effective 11/30/2018

*Original authority: 444.362, RSMo 1989 and 444.380, RSMo 1989.