Rule 30-901-14.2 - Seal of the Licensee1. Upon completion of licensure, the licensee will be advised that he shall secure an official seal which shall be applied to engineering drawings, specifications, reports and other engineering or surveying documents prepared by him or under his responsible supervisory control. A copy of the seal imprint shall be furnished to the Board before the certificate of licensure will be released. Failure to provide proof of seal may result in disciplinary action by the Board.2. The seals to be used by the licensees are to be circular in form and from 1 5/8 to 2 inches in diameter. A copy of the design is included in this publication.3. Seals obtained prior to the adoption of this rule and which are in conformance with prior Board rules are acceptable.4. Rubber stamps, which are identical to the approved seals, in size, design and content may be used by the licensee at his option.30 Miss. Code. R. 901-14.2
Miss. Code Ann. § 73-13-15