Subchapter 4 - General Requirements
- Rule 15-10-76-3.4.1 - Inspection of Boilers and Pressure Vessels
- Rule 15-10-76-3.4.2 - Boilers and Pressure Vessels Improperly Prepared for Inspection
- Rule 15-10-76-3.4.3 - Removal of Covering to Permit Inspection
- Rule 15-10-76-3.4.4 - Lap-Seam Crack
- Rule 15-10-76-3.4.5 - Hydrostatic Pressure Tests
- Rule 15-10-76-3.4.6 - Automatic Low-Water Fuel Cutoff and/or Water-Feeding Device
- Rule 15-10-76-3.4.7 - Pressure-Reducing Valves
- Rule 15-10-76-3.4.8 - Blowoff Equipment
- Rule 15-10-76-3.4.9 - Location of Discharge Piping Outlets
- Rule 15-10-76-3.4.10 - Major Repairs
- Rule 15-10-76-3.4.11 - Supports
- Rule 15-10-76-3.4.12 - Boiler Door Latches
- Rule 15-10-76-3.4.13 - Clearance
- Rule 15-10-76-3.4.14 - Ladders and Runways
- Rule 15-10-76-3.4.15 - Air and Ventilation Requirements
- Rule 15-10-76-3.4.16 - Fired Jacketed Steam Kettles
- Rule 15-10-76-3.4.17 - Shop Inspection and Inspection of Secondhand or Used Boilers or Pressure Vessels
- Rule 15-10-76-3.4.18 - Manufacturers
- Rule 15-10-76-3.4.19 - Conditions Not Covered by These Rules and Regulations
- Rule 15-10-76-3.4.20 - Accessibility for Inspection
- Rule 15-10-76-3.4.21 - Boilers Exposed to the Elements
- Rule 15-10-76-3.4.22 - Fired Storage Water Heaters and Supply Vessels
- Rule 15-10-76-3.4.23 - Safety Valves and Rupture Disk Notes
- Rule 15-10-76-3.4.24 - Portable Boilers and Pressure Vessels
- Rule 15-10-76-3.4.25 - Fuel Conversions and Increases in Size of Fuel Burning Apparatus
- Rule 15-10-76-3.4.26 - Inspection Openings - Not To Be Used for Any Other Purpose
- Rule 15-10-76-3.4.27 - Boilers and Pressure Vessels That Are Exempt
- Rule 15-10-76-3.4.28 - Exit from Boiler Room
- Rule 15-10-76-3.4.29 - Return Loop Connection
- Rule 15-10-76-3.4.30 - Authorization Required for Repairs