Rule 11-4-5.3 - Waste Tire Generator RequirementsA. A waste tire generator providing waste tires for transportation to a facility for storage, processing, disposal, or retreading/resale shall complete and sign a certification form as provided by the Department certifying the following: (1) the number of waste tires to be transported or in the event that the waste tires have been cut, chopped, sliced, shredded or otherwise processed into multiple pieces, the volume of processed waste tires to be transported;(2) the county and state in which the tires were collected; and(3) the name and address of the waste tire processing, storage, disposal or retreading resale facility for which the tires are destined.B. The waste tire generator, after completing all applicable portions of the certification form, shall provide the form to the person transporting the waste tires for his completion and signature, and shall retain a copy of the certification form signed by the waste tire generator and the waste tire transporter for at least three (3) years.C. The waste tire generator shall only allow a registered waste tire hauler who possesses a valid identification number pursuant to Rule 5.5(A) to collect and transport waste tires, if:(1) 50 or more tires are transported, or(2) if the transporter is compensated by the generator for such service.Miss. Code Ann. §§ 17-17-1, et seq., 17-17-201, et seq., 17-17-401, et seq., 49-2-9(1)(b), 49-17-17(i), 49-17-1, et seq., and 49-2-1, et seq.