Minn. R. agency 167, ch. 7011, INDIRECT HEATING FOSSIL-FUEL-BURNING EQUIPMENT, pt. 7011.0500

Current through Register Vol. 49, No. 18, October 28, 2024
Part 7011.0500 - DEFINITIONS
Subpart 1.Scope.

As used in parts 7011.0500 to 7011.0550, the following words shall have the meanings defined herein.

Subp. 2.Actual heat input.

"Actual heat input" means the number of Btu per hour (cal/hr) determined by multiplying the gross heating value of the fuel by the rate of fuel burned.

Subp. 3.Coal refuse.

"Coal refuse" means waste products of coal mining, cleaning, and coal preparation operations (e.g. culm, gob, etc.) containing coal, matrix material, clay, and other organic and inorganic material.

Subp. 4.Derating.

"Derating" means limitation of heat input and corresponding steam output capacity.

Subp. 5.Direct heating equipment.

"Direct heating equipment" means a furnace, kiln, dryer, or other combustion equipment used in the burning of a fossil fuel for the purpose of processing a material where the products of combustion have direct contact with the heated material.

Subp. 6.Distillate oil.

"Distillate oil" means grades of oils known as No. 1 and No. 2, as defined in the A.S.T.M. D 396 (1973).

Subp. 7.Fossil fuel.

"Fossil fuel" means natural gas, petroleum, coal, wood, peat, and any form of solid, liquid, or gaseous fuel derived from such materials for the purpose of creating useful heat.

Subp. 8.Gross heating value.

"Gross heating value" means the gross calorific value (cal/g or Btu/1b) of the fuel combusted as determined by A.S.T.M. test methods D 2015-66(72) for solid fuels; D 1826-64(70) for gaseous fuels, and D 240-64(73) for liquid fuels.

Subp. 9.Indirect heating equipment.

"Indirect heating equipment" means a furnace, a boiler, or other unit of combustion equipment used in the process of burning fossil fuel for the purpose of producing steam, hot water, hot air, or other hot liquid, gas, or solid, where the products of combustion do not have direct contact with the heated medium.

Subp. 10.Rated heat input.

"Rated heat input" means the number of Btu per hour (cal/hr) which the manufacturer has determined to be the continuous rated capability of the indirect heating equipment, or, where the rated heat input is not specified by the manufacturer, the number of Btu per hour (cal/hr) determined by dividing the rated heat output by the overall thermal efficiency.

Subp. 11.Residual oil.

"Residual oil" means grades of oils known as No. 4, No. 5 (light), No. 5 (heavy), and No. 6, as listed in A.S.T.M. D 396 (1973).

Subp. 12.Steam generating unit.

"Steam generating unit" means indirect heating equipment used to produce steam.

Minn. R. agency 167, ch. 7011, INDIRECT HEATING FOSSIL-FUEL-BURNING EQUIPMENT, pt. 7011.0500

18 SR 614

Statutory Authority: MS s 116.07