Current through Vol. 24-22, December 15, 2024
Section R. 408.17442 - Using, covering, or protecting toolsRule 7442.
(1) Chain saws that are specifically designed for firefighting operations to cut holes in roofs, floors, and walls shall be used where cutting operations are performed. If a chain saw is not in use, then the cutting teeth of the chain saw shall be covered to prevent inadvertent contact.(2) An axe or other sharp-edged or pointed tool shall be protected when stored or carried on the apparatus. A rounded tipped pike pole is excluded from the requirements of this subrule.Mich. Admin. Code R. 408.17442
1979 AC; 1993 AACS; 2001 AACS