Current through Vol. 24-22, December 15, 2024
Section R. 408.12726 - Circular re-saw guardsRule 2726.
(1) A circular re-saw shall be guarded by a hood type guard or shield of metal above the saw. This guard or shield shall comply with R 408.12722.(2) Each circular re-saw, except self-feed saws with a roller or wheel at back of the saw, shall have a spreader fastened securely behind the saw. The spreader shall be thinner than the saw kerf and slightly thicker than the saw disk.Mich. Admin. Code R. 408.12726
1979 AC; 2018 MR 3, Eff. 2/20/2018