Section R. 408.12635 - Metal band sawsRule 2635.
(1) A vertical metal band saw shall be guarded as follows: (a) The band wheels and all portions of the blade, except as provided by subdivision (b) of this subrule, shall be fully enclosed by solid material or perforated metal which prevents the operator from coming in contact with the blade.(b) The portion of the blade between the table and the front side of the upper wheel shall have an adjustable blade guard that is maintained within 1/4 inch of the work to be cut or the holder of the material being cut.(2) A horizontal metal band saw shall be guarded as follows: (a) The band wheels and the upper portion of the blade shall be fully enclosed by solid material or perforated metal which prevents the operator from coming in contact with the upper portion of the blade.(b) The guides shall be maintained as close as practical to the stock being cut.(3) A horizontal metal band saw used in a vertical position shall be guarded as required by the provisions of subrule (1) of this rule.Mich. Admin. Code R. 408.12635