Current through Vol. 24-22, December 15, 2024
Section R. 408.12310 - Definitions; PRule 2310.
(1) "Pinch point" means any point, other than the point of operation, at which it is possible for a part of the body to be injured by being caught between the moving parts of the press or auxiliary equipment, between moving and stationary parts of the press or auxiliary equipment, or between the material and moving parts of the press or auxiliary equipment.(2) "Point of operation" means the area of the press where material is actually positioned, and where work is being performed, during any process such as shearing, punching, or forming.(3) "Point of operation device" means a press control or attachment that does any of the following: (a) Restrains the operator from inadvertently reaching into the point of operation.(b) Prevents normal press operation if the operator's hands are inadvertently within the point of operation.(c) Automatically withdraws the operator's hands if they are inadvertently within the point of operation as the dies close.(4) "Presence sensing device" means a device designed, constructed, and arranged to create a sensing field or area, and to deactivate the control of the press when an operator's hand or other part of the body is within the field or area.(5) "Press," as referred to in this part, means a powered machine, having a liquid energy transfer media that actuates the slide motion toward and away from the bed surface, where the slide is guided in a definite path by a frame or cylinder.(6) "Primary operation" means a preliminary press operation applied to material to be subsequently processed. Examples of primary operation include blanking, piercing, and corner cutting.(7) "Pull-out device" means a mechanism attached to the operator's hands or arms and connected to the slide or upper die, and designed to withdraw the operator's hands from the point of operation as the slide or upper die descends.Mich. Admin. Code R. 408.12310
1979 AC; 2023 MR 6, Eff. 3/27/2023