Mich. Admin. Code R. 336.1286

Current through Vol. 24-21, December 1, 2024

Section R. 336.1286 - Permit to install exemptions; plastic processing equipment

Rule 286.

(1) This rule does not apply if prohibited by R 336.1278 and unless the requirements of R 336.1278a have been met.

(2) The requirement of R 336.1201(1) to obtain a permit to install does not apply to any of the following:

(a) Plastic extrusion, rotocasting, and pultrusion equipment and associated plastic resin handling, storage, and drying equipment.

(b) Plastic injection, compression, and transfer molding equipment and associated plastic resin handling, storage, and drying equipment.

(c) Plastic blow molding equipment and associated plastic resin handling, storage, and drying equipment if the blowing gas is 1 or more of the following gasses:

(i) Air.

(ii) Nitrogen.

(iii) Oxygen.

(iv) Carbon dioxide.

(v) Helium.

(vi) Neon.

(vii) Argon.

(viii) Krypton.

(ix) Xenon.

(d) Plastic thermoforming equipment.

(e) Reaction injection molding (open or closed mold) and slabstock/casting equipment.

(f) Plastic welding.

Mich. Admin. Code R. 336.1286

1993 AACS; 1995 AACS; 1997 AACS; 2016 MR 24, Eff. 12/20/2016