Section R. 336.1203 - Information requiredRule 203.
(1) An application for a permit to install shall include information required by the department on the application form or by written notice. This information may include, as necessary, any of the following: (a) A complete description, in appropriate detail, of each emission unit or process covered by the application. The description shall include the size and type along with the make and model, if known, of the proposed process equipment, including any air pollution control equipment. The description shall also specify the proposed operating schedule of the equipment, provide details of the type and feed rate of material used in the process, and provide the capture and removal efficiency of any air pollution control devices. Applications for complex or multiple processes shall also include a block diagram showing the flow of materials and intermediate and final products.(b) A description of any federal, state, or local air pollution control regulations which the applicant believes are applicable to the proposed process equipment, including a proposed method of complying with the regulations.(c) A description in appropriate detail of the nature, concentration, particle size, pressure, temperature, and the uncontrolled and controlled quantity of all air contaminants that are reasonably anticipated due to the operation of the proposed process equipment.(d) A description of how the air contaminant emissions from the proposed process equipment will be controlled or otherwise minimized.(e) A description of each stack or vent related to the proposed process equipment, including the minimum anticipated height above ground, maximum anticipated internal dimensions, discharge orientation, exhaust volume flow rate, exhaust gas temperature, and rain protection device, if any.(f) Scale drawings showing a plan view of the owner's property to the property lines and the location of the proposed equipment. The drawings shall include the height and outline of all structures within 150 feet of the proposed equipment and show any fence lines. All stacks or other emission points related to the proposed equipment shall also be shown on the drawings.(g) Information, in a form prescribed by the department, that is necessary for the preparation of an environmental impact statement if, in the judgment of the department, the equipment for which a permit is sought may have a significant effect on the environment.(h) Data demonstrating that the emissions from the process will not have an unacceptable air quality impact in relation to all federal, state, and local air quality standards.(2) The department may require additional information necessary to evaluate or take action on the application. The applicant shall furnish all additional information, within 30 days of a written request by the department, except as provided by the following provisions: (a) The applicant may request a longer period of time, in writing, specifying the reason why 30 days was not reasonable for submitting the information.(b) The department may provide written notice to the applicant of an alternate time period for the submittal, either as part of the original request or upon the granting of an extension requested by the applicant.(3) An applicant may reference a previously submitted permit application for the purpose of supplying a portion of the information required by this rule. Any reference to a previously submitted permit application shall clearly identify the permit application number assigned to the previous application by the department. If acceptable to the department, an applicant may also reference other previously submitted information for the purpose of supplying a portion of the information required by this rule.Mich. Admin. Code R. 336.1203
1980 AACS; 2003 AACS; 2016 MR 24, Eff. 12/20/2016