Current through Register Vol. 51, No. 21, October 18, 2024
Section 26.20.22.07 - Records of Blasting OperationsA. The operator shall retain a record of all blasts for at least 3 years. Upon request, copies of these records shall be made available to the Bureau and to the public for inspection.B. The records shall contain the following data:(1) Name of the operator conducting the blast;(2) Location, date, and time of blast;(3) Name, signature, and certification number of blaster conducting the blast;(4) Identification, direction, and distance, in feet, from the nearest blast hole to the nearest dwelling, public building, school, church, community or institutional building outside the permit area, except those described in Regulation .06K of this chapter;(5) Weather conditions, including those which may cause possible adverse blasting effects;(6) Type of material blasted;(7) Sketches of the blast pattern including number of holes, burden, spacing, decks, and delay pattern;(8) Diameter and depth of holes;(9) Types of explosives used;(10) Total weight of explosives used per hole;(11) The maximum weight of explosives detonated in any 8-millisecond period;(13) Type and length of stemming;(14) Mats or other protections used;(15) Seismographic and airblast records, if required, which shall include: (a) Type of instrument, sensitivity, and calibration signal or certification of annual calibration,(b) Exact location of instrument and the date, time, and distance from the blast,(c) Name of the person and firm taking the reading,(d) Name of the person and firm analyzing the seismographic record, and(e) The vibration or airblast level recorded, or both;(16) Reasons and conditions for each unscheduled blast.Md. Code Regs. 26.20.22.07
Regulations .07 were previously codified as COMAR 08.13.09.25 a A_H, respectively. Recodification occurred in April, 1993. For a history of these regulations before April, 1993, see "Administrative History of COMAR 08.13.09 before April, 1993" which follows COMAR 26.20.01.