Md. Code Regs. 26.10.01.03

Current through Register Vol. 51, No. 22, November 1, 2024

Section 26.10.01.03 - Incorporation by Reference

A. In this subtitle, the following documents published by the American Petroleum Institute (API) are incorporated by reference:

(1) Specification for Bolted Tanks for Storage of Production Liquids (API Specification 12B, 17th Edition, December 2020);

(2) Specification for Field-welded Tanks for Storage of Production Liquids (API Specification 12D, 12th Edition, June 2017);

(3) Risk-based Inspection (API Recommended Practice 580, 3rd Edition, February 2016);

(4) Welded Tanks for Oil Storage (API Standard 650, 13th Edition, March 2020, Errata 1, January 2021);

(5) Cathodic Protection of Aboveground Petroleum Storage Tanks (API Recommended Practice 651, 4th Edition, September 2014);

(6) Tank Inspection, Repair, Alteration, and Reconstruction (API Standard 653, 5th Edition, November 2014), except Annex H " Similar Service Assessment;

(7) Closure of Underground Petroleum Storage Tanks (API Recommended Practice 1604, 4th Edition, February 2021);

(8) Installation of Underground Petroleum Storage Systems (API Recommended Practice 1615, 6th Edition, April 2011, Reaffirmed May 2020);

(9) Storing and Handling Ethanol and Gasoline-ethanol Blends at Distribution Terminals and Filling Stations (API Recommended Practice 1626, 2nd Edition, August 2010, Reaffirmed May 2020);

(10) Interior Lining and Periodic Inspection of Underground Storage Tanks (API Standard 1631, 5th Edition, June 2001, Reaffirmed May 2020);

(11) Using the API Color-Symbol System to Identify Equipment, Vehicles, and Transfer Points for Petroleum Fuels and Related Products at Dispensing and Storage Facilities and Distribution Terminals (API Recommended Practice 1637, 4th Edition, April 2020);

(12) Venting Atmospheric and Low-pressure Storage Tanks (API Standard 2000, 7th Edition, March 2014, Reaffirmed April 2020); and

(13) Overfill Protection for Storage Tanks in Petroleum Facilities (ANSI/API Standard 2350, 5th Edition, September 2020).

B. In this subtitle, the following documents published by the National Association of Corrosion Engineers (NACE) are incorporated by reference:

(1) Control of External Corrosion on Underground or Submerged Metallic Piping Systems (NACE SP0169-2013, Approved April 1969, Revised October 2013);

(2) Application of Cathodic Protection to Control External Corrosion of Carbon Steel On-Grade Storage Tank Bottoms (NACE SP0193-2016, Approved October 1993, Revised February 2016);

(3) Corrosion Control of Underground Storage Tank Systems by Cathodic Protection (NACE SP0285-2011, Approved March 1985, Revised March 2011);

(4) Measurement Techniques Related to Criteria for Cathodic Protection of Underground Storage Tank Systems (NACE Standard TM0101-2012, Approved November 2001, Revised March 2012); and

(5) Measurement Techniques Related to Criteria for Cathodic Protection on Underground or Submerged Metallic Piping Systems (NACE TM0497-2018, Approved September 2018).

C. In this subtitle, the following documents published by the National Fire Protection Association (NFPA) are incorporated by reference:

(1) Flammable and Combustible Liquids Code (NFPA 30, 2021 Edition);

(2) Code for Motor Fuel Dispensing Facilities and Repair Garages (NFPA 30A, 2021 Edition);

(3) Standard for the Installation of Oil-Burning Equipment (NFPA 31, 2020 Edition);

(4) National Electrical Code (NFPA 70, 2020 Edition);

(5) Standard for Tank Vehicles for Flammable and Combustible Liquids (NFPA 385, 2017 Edition); and

(6) Standard System for the Identification of the Hazards of Materials for Emergency Response (NFPA 704, 2022 Edition).

D. In this subtitle, the following documents published by the Petroleum Equipment Institute (PEI) are incorporated by reference:

(1) Recommended Practices for Installation of Underground Liquid Storage Systems (PEI/RP100-20, 2020 Edition);

(2) Recommended Practices for Installation of Aboveground Storage Systems for Motor Vehicle Fueling (PEI/RP200-19, 2019 Edition);

(3) Recommended Practices for Overfill Prevention for Shop-Fabricated Aboveground Tanks (PEI/RP600-18, 2018 Edition);

(4) Recommended Practices for Installation of Bulk Storage Plants (PEI/RP800-20, 2020 Edition);

(5) Recommended Practices for the Inspection and Maintenance of UST Systems (PEI/RP900-17, 2017 Edition);

(6) Recommended Practices for the Installation of Marina Fueling Systems (PEI/RP1000-14, 2014 Edition);

(7) Recommended Practices for the Testing and Verification of Spill, Overfill, Leak Detection and Secondary Containment Equipment at UST Facilities (PEI/RP1200-19, 2019 Edition); and

(8) Recommended Practices for the Closure of Underground Storage Tank and Shop-Fabricated Aboveground Storage Tank Systems (PEI/RP1700-18, 2018 Edition).

E. In this subtitle, the following documents published by Steel Tank Institute/Steel Plate Fabricators Association (STI/SPFA) are incorporated by reference:

(1) Standard for the Inspection of Aboveground Storage Tanks (STI/SPFA SP001, 6th Edition, January 2018);

(2) Cathodic Protection Testing Procedures for sti-P3 USTs (STI/SPFA R051, Revised April 2017); and

(3) Recommended Practice for the Addition of Supplemental Anodes to sti-P3 USTs (STI/SFPA R972, Revised December 2010).

F. In this subtitle, the following documents published by UL are incorporated by reference:

(1) Standard for Safety, Steel Aboveground Tanks for Flammable and Combustible Liquids (UL 142, 10th Edition, May 2019, Revised January 2021); and

(2) Standard for Safety, Special Purpose Aboveground Tanks for Specific Flammable or Combustible Liquids (UL 142A, 1st Edition, May 2018, Revised January 2021).

G. In this subtitle, USEPA Doing Inventory Control Right for Underground Storage Tanks (USEPA 510-B-93-004, November 1993) is incorporated by reference.

H. In this subtitle, the following test methods as published in "Test Methods for Evaluating Solid Waste, Physical/Chemical Methods Compendium" (USEPA SW-846, 3rd Edition) are incorporated by reference:

(1) USEPA Test Method 1311 - Toxicity Characteristic Leaching Procedure (July 1992, Revision 0);

(2) USEPA Test Method 8015C - Nonhalogenated Organics by Gas Chromatography (February 2007, Revision 3);

(3) USEPA Test Method 8082A - Polychlorinated Biphenyls (PCBs) by Gas Chromatography (February 2007, Revision 1); and

(4) USEPA Test Method 8260D - Volatile Organic Compounds by Gas Chromatography/Mass Spectrometry (June 2018, Revision 4).

I. In this subtitle, the following test methods as published in "Selected Analytical Methods for Environmental Remediation and Recovery (SAM) 2017" (USEPA/600/R-17/356, 2017) are incorporated by reference:

(1) USEPA Test Method 524.2 - Measurement of Purgeable Organic Compounds in Water by Capillary Column Gas Chromatography/Mass Spectrometry (1995 Edition, Revision 4.1); and

(2) USEPA Test Method 8015D - Nonhalogenated Organics Using GC/FID (June 2003, Revision 4).

Md. Code Regs. 26.10.01.03

Regulations .03 transferred to COMAR 1.5.01 effective July 1, 1980
Regulations .03 adopted effective January 28, 1985 (12:2 Md. R. 134); Regulations .03 transferred to COMAR 1.5.01 effective July 1, 1980
Regulations .03 adopted effective January 28, 1985 (12:2 Md. R. 134); adopted effective 49:12 Md. R. 642, eff. 6/13/2022