Current through Register Vol. 51, No. 24, December 2, 2024
Section 26.08.05.06 - Application for CertificationA. An application is required for: (1) Certification for microbiology, chemistry, or radiochemistry; or(2) Renewal of certification.B. An application for water quality laboratory certification shall be submitted to the Department on a form provided by the Department, and shall include, but not be limited to, the following information:(1) Name, address, and valid phone number of the water quality laboratory;(2) Name of the water quality laboratory owner or director;(3) A listing of the tests for which certification is requested;(4) Description of facilities, equipment, and methodology;(5) The name, education, experience, and training of the water quality laboratory supervisor;(6) The name, education, experience, and training of all water quality laboratory analysts;(7) The approximate number of tests by category performed annually by the water quality laboratory;(8) The laboratory's Quality Assurance Manual;(9) Valid Federal Employer Identification Number (FEIN) as required by Environment Article, § 1-203, Annotated Code of Maryland;(10) A copy of the valid and current water quality laboratory certification that has been issued by any other state or by NELAP, as applicable;(11) Proficiency test results for each certified parameter and approved test method; and(12) Fees, if applicable.C. The laboratory owner, director, or quality assurance officer shall complete fully and sign the application.Md. Code Regs. 26.08.05.06
Regulations .06 adopted effective 41:14 Md. R. 800, eff.7/21/2014