Md. Code Regs. 11.19.02.34-1

Current through Register Vol. 52, No. 1, January 10, 2025

Section 11.19.02.34-1 - Crossing Arm

A. A crossing arm may be installed on the far right of the front bumper. The crossing arm:

(1) Shall be securely bolt-mounted;

(2) Shall be easily removable for towing;

(3) Shall be activated simultaneously with the stop arm;

(4) May not open more than 90 degrees;

(5) Shall extend a minimum of 66 inches from the front of the bumper when activated;

(6) May not have sharp edges or projections which may cause injury to students; and

(7) Shall be air, vacuum, or electrically operated and may not have lights.

B. Interrupt Switch.

(1) A crossing arm interrupt switch may be installed on the dash near the control box for the alternating flashing lights.

(2) Pressing the switch shall stop the arm from opening for a full cycle and the arm shall recycle after the alternating flashing lights have been deactivated.

Md. Code Regs. 11.19.02.34-1

Regulation .34-1 adopted effective October 7, 1996 (23:20 Md. R. 1425)