Md. Code Regs. 09.12.52.11

Current through Register Vol. 51, No. 22, November 1, 2024

Section 09.12.52.11 - State Certification Insignias

A. Effect of Affixing State Certification Insignias. The approved testing facility shall affix a State certification insignia to every industrialized building unit which has been found to be in full compliance with all applicable standards of the Department. The manner of affixing is prescribed in Regulation .10. The legal effect of affixing the State certification insignia is a certification by the approved testing facility, additional to the certification represented by the label of the approved testing facility, that the unit has been inspected and complies in all respects with the requirements of these Regulations.

B. Issue of Certification Insignias. Approved State certification insignias shall be purchased from the Department. The insignias will be issued to the approved testing facilities only upon written request, accompanied by advance payment.

C. Control of Insignias. Each approved testing facility shall maintain close control of the State certification insignias to insure their proper use. The facility shall submit to the Department a monthly report itemizing the insignias issued to the manufacturers by serial numbers, and stating the number of State insignias on hand at the end of each month.

D. Report of Shipments. The manufacturer shall send to the Department a monthly report of units shipped, showing the State certification insignia numbers, manufacturer's serial numbers, approved testing facilities' serial numbers, type or model, and destination in the State. The report shall be sent no later than the 10th day of the following month.

Md. Code Regs. 09.12.52.11

Regulation .11 recodified from 05.02.04.11 effective 46:6 Md. R. 345, eff. 3/25/2019