Subsection 222-1-200-55 - SEATS AND RESTRAINT SYSTEMS1. SEATS A. Reject vehicle if any seat is loose or if the seat frame is broken.B. Reject vehicle if the seat adjusting mechanism does not operate properly or will not lock into position.2. SAFETY BELT(S) A. Reject vehicle if any safety belt is not installed as originally manufactured.B. Reject vehicle if any safety belt is missing, frayed, not securely mounted, or if the webbing of the belt is torn.C. Reject vehicle if any lap belt is not attached to the seat and a secondary belt from the seat to the floor, if vehicle is equipped with an air ride seat.D. Reject vehicle if any retractor fails to retract or does not allow the belt to extend to the maximum length.3. AIRBAG(S) (IF EQUIPPED) A. Reject vehicle if, with the engine running, any diagnostic light or malfunction code indicates that an air bag is not functioning properly.B. Reject vehicle if any air bag diagnostic light fails to illuminate as designed with the ignition key in the on position when the engine is not running.C. Reject vehicle if a deployed air bag has not been properly replaced with a functioning air bag system.D. Reject vehicle if the air bag has been disconnected, and/or a non- factory disconnect switch has been installed, unless the vehicle owner has a letter of authorization from the National Highway Traffic Safety Administration. C.M.R. 16, 222, ch. 1, § 222-1-200, subsec. 222-1-200-55