06- 096 C.M.R. ch. 129, § 2

Current through 2024-51, December 18, 2024

Section 096-129-2 - Definitions

A.General coating definitions

(1)Air-dried coating. "Air-dried coating" means a coating that is dried by the use of air or forced warm air at temperatures up to 90 degrees Celsius (C) (194 degrees Fahrenheit (F)).

(2)Baked coating. "Baked coating" means a coating that is cured at a temperature at or above 90 degrees Celsius (C) (194 degrees Fahrenheit (F)).

(3)Coating. "Coating" means a material applied in a thin layer to a surface as a protective, decorative, or functional film. This term often refers to paints such as lacquers or enamels, but also refers to films applied to other materials such as varnishes, sealants, adhesives, inks, maskants, and temporary protective coatings. Such materials include, but are not limited to, paints, varnishes, sealants, adhesives, inks, maskants, and temporary protective coatings.

(4)Coating unit. "Coating unit" means a series of one or more coating applicators and any associated drying area or oven wherein a coating is applied, dried, or cured. A coating unit ends at the point where the coating is dried or cured, or prior to any subsequent application of a different coating. A surface coating operation does not require an oven or flashoff area in order to be included in this definition.

(5)Control device. "Control device" means equipment used to reduce, by destruction or removal, the amount of air pollutant(s) in an air stream prior to discharge to the ambient air.

(6)Day. "Day" means a period of 24 consecutive hours beginning at midnight, local time, or beginning at a time consistent with a surface coating facility's operating schedule.

(7)Exempt compounds. See VOC definition in Chapter 100.

(8)Flashoff area. "Flashoff area" means the space between the coating application area and the oven.

(9)Major Subassembly. "Major Subassembly" means a unit assembled separately but designed to be incorporated with other units into a larger manufactured product which performs a significant function such as propulsion, directional control, or is a significant portion of the exterior of the vessel or aircraft. Major subassemblies do not include simple items such as fixtures and fittings.

(10)Maximum theoretical emissions. "Maximum theoretical emissions" means the quantity of VOC that theoretically could be emitted by a surface coating unit, line or operation without control devices and is based on one of the following:

(a) The design capacity or maximum production capacity of the surface coating facility and 8,760 hours of operation per 12 month rolling period; or

(b) Hours of operation and/or design and/or process conditions, including operation rates, that are limited by enforceable permit conditions. Such permit conditions include short term limits (e.g., the number of operating hours per 30 day rolling average) and corresponding recordkeeping provisions.

The design capacity or maximum production capacity includes use of coatings and inks with the highest VOC content used in practice by the surface coating facility for the two (2) years preceding the effective date of this chapter.

(11)Normally closed container. "Normally closed container" means a container that is closed unless an operator is actively engaged in activities such as emptying or filling the container.

(12)Oven. "Oven" means a chamber which is used to bake, cure, polymerize or dry a coating.

(13)Plastisol. "Plastisol" means a coating made of a mixture of finely divided resin and a plasticizer. Plastisol is applied as a thick gel that solidifies when heated.

(14)Prime coat. "Prime coat" means the first of two (2) or more coatings applied to a surface.

(15)Roller coating. "Roller coating" means the application of a coating to a substrate by means of hard rubber or metal rolls.

(16)Substrate. "Substrate" means the surface to which a coating is applied.

(17)Web coating line. "Web coating line" means all of the coating applicator(s), drying area(s), or oven(s), located between an unwind station and a rewind station, that are used to apply coating onto a continuous strip of substrate (the web). A web coating line need not have a drying oven in order to be included in this definition.

B.Surface coating of cans

(1)Can. "Can" means any cylindrical, single-walled container, with or without a top, cover, spout, or handle, that is manufactured from metal sheets thinner than 29 gauge (0.0141 inch (in)).

(2)Can coating unit. "Can coating unit" means a coating unit in which any coating is applied onto the surface of cans or can components.

(3)End sealing compound coat. "End sealing compound coat" means a compound applied onto can ends that functions as a gasket when the end is assembled onto the can.

(4)Exterior basecoat. "Exterior basecoat" means a coating applied to the exterior of a two-piece can body to provide protection to the metal, or to provide background for any lithographic or printing operation.

(5)Interior body spray coat. "Interior body spray coat" means a coating applied to the interior of the can body to provide a protective film between the product and the can.

(6)Over varnish. "Over varnish" means a coating applied directly over a design coating or directly over ink to reduce the coefficient of friction, to provide gloss, and to protect the finish against abrasion and corrosion.

(7)Sheet basecoat. "Sheet basecoat" means a coating applied to metal in sheet form to serve as either the exterior or interior of two-piece or three-piece can bodies or can ends.

(8)Side-seam spray coat. "Side-seam spray coat" means a coating applied to the seam of a three-piece can.

(9)Three-piece can. "Three-piece can" means a can that is made by rolling a rectangular sheet of metal into a cylinder that is soldered, welded, or cemented at the seam with two ends attached.

(10)Two-piece can. "Two-piece can" means a can whose body and one end are formed from a shallow cup and to which the other end is later attached.

(11)Two-piece can exterior end coat. "Two-piece can exterior end coat" means a coating applied by roller coating or spraying to the exterior end of a two-piece can to provide protection to the metal.

C.Surface coating of fabric

(1)Fabric coating line. "Fabric coating line" means a web coating line where coating is applied to fabric. A fabric printing line engaged in the dyeing and finishing of textiles as classified in Industrial Group 226 or Industry 2231 is not considered a fabric coating line.

(2)Fabric coating unit. "Fabric coating unit" means a coating application station and its associated flashoff area, drying area, or oven wherein coating is applied and dried or cured in a fabric coating line. A fabric coating line may include more than one fabric coating unit.

D.Surface coating of vinyl

Vinyl coating line. "Vinyl coating line" means a web coating line where a decorative, functional, or protective coating is applied to a continuous web coating line of vinyl or vinyl-coated fabric. Lines used for coating or printing on vinyl and coating or printing on urethane are considered vinyl coating lines.

E.Surface coating of metal furniture

(1)Metal furniture. "Metal furniture" means any furniture piece made of metal, or any metal part that will be assembled with other metal, wood, fabric, plastic or glass parts to form a furniture piece including, but not limited to, tables, chairs, waste baskets, beds, desks, lockers, benches, shelving, file cabinets and room dividers. This definition does not apply to the coating of miscellaneous metal and plastic parts and products as defined in Subsection 2(F)(5) of this chapter.

(2)Metal furniture coating unit. "Metal furniture coating unit" means a coating unit in which a protective, decorative, or functional coating is applied onto the surface of metal furniture.

F.Surface coating of miscellaneous metal and plastic parts and products

(1)Clear coating. "Clear coating" means a coating that (1) either lacks color and opacity or is transparent, and (2) uses the surface to which it is applied as a reflective base or undertone color.

(2)Drum. "Drum" means any cylindrical metal shipping container of thirteen (13) to 110-gallon capacity.

(3)Extreme performance coating. "Extreme performance coating" means a coating intended for continuous or repeated exposure to extreme environmental conditions, including but not limited to, the outdoors, temperatures above 95 degrees C or 203 degrees F, detergents, abrasive and scouring agents, solvents, and corrosive atmospheres.

(4)Miscellaneous metal and plastic parts and products. "Miscellaneous metal and plastic parts and products" means any metal and plastic parts such products include, but are not limited to, metal and plastic components of the following types of products as well as the products themselves: fabricated metal products, molded plastic parts, small and large farm machinery, commercial and industrial machinery and equipment, automotive or transportation equipment, interior or exterior automotive parts, construction equipment, motor vehicle accessories, bicycles and sporting goods, toys, recreational vehicles, pleasure craft (recreational boats), extruded aluminum structural components, railroad cars, heavier vehicles, lawn and garden equipment, business machines, laboratory and medical equipment, electronic equipment, steel drums, metal pipes, and other industrial and household products.

Miscellaneous metal and plastic parts and products does not include:

1) maintenance, repair or refinishing of machinery, production equipment, piping, storage vessels and similar parts where the part is to be used on site and not offered for sale;

2) shipbuilding operations;

3) the field application of coatings to stationary steel structures and their appurtenances; and

4) aerospace manufacturing, overhaul, and repair operations.

(5)Miscellaneous metal and plastic parts and products coating unit. "Miscellaneous metal and plastic parts and products coating unit" means a coating unit in which a coating is applied to any miscellaneous metal and plastic parts and products.

(6)Pail. "Pail" means any cylindrical metal shipping container of one (1) to twelve (12) gallon capacity and constructed of 29 gauge and heavier metal.

(7)Pleasure craft. "Pleasure craft" means any marine or freshwater vessel manufactured or operated primarily for recreational purposes.

(8)Pleasure craft coating. "Pleasure craft coating" means any marine coating, except unsaturated polyester resin (fiberglass), applied to a pleasure craft or to parts and components of a pleasure craft.

(9)Refinishing. "Refinishing" means the repainting of used equipment.

G.Surface coating of flatwood paneling

(1)Class I (or Class II) hardboard paneling finish. "Class I (or Class II) hardboard paneling finish" means finishes that meet the specifications of Voluntary Product Standard PS-59-73 as approved by the American National Standards Institute.

(2)Flatwood paneling coating line. "Flatwood paneling coating line" means a coating line used to apply and dry or cure coatings applied to one of the following flatwood paneling categories: printed interior panels made of hardwood plywood and thin particleboard (i.e., less than or equal to 0.64 centimeter (cm) (0.25 in) thick; natural finish hardwood plywood panels; Class II hardboard paneling finish; tileboard; and exterior siding. Flatwood paneling coating line does not include Class I hardwood panels, particle board used in furniture, insulation board, and soft plywood coating lines.

(3)Hardboard. "Hardboard" means a panel manufactured primarily from wood fibers that are consolidated under heat and pressure in a hot press.

(4)Hardwood plywood. "Hardwood plywood" means plywood whose surface layer is a veneer of hardwood.

(5)Natural finish hardwood plywood panels. "Natural finish hardwood plywood panels" means panels whose original grain pattern is enhanced by essentially transparent finishes frequently supplemented by fillers and toners.

(6)Printed interior panels. "Printed interior panels" means panels whose grain or natural surface is obscured by fillers and basecoat upon which a simulated grain or decorative pattern is printed.

(7)Thin particleboard. "Thin particleboard" means a manufactured board that is 0.64 cm (0.25 in) or less in thickness made of individual wood particles that have been coated with a binder and formed into flat sheets by pressure.

(8)Tileboard. "Tileboard" means paneling that has a colored, waterproof surface coating.

06- 096 C.M.R. ch. 129, § 2