Current through 2024-51, December 18, 2024
Section 385-890-A-IV - Incorporation by ReferenceA. The materials listed in this section are incorporated by reference ("IBR") in the corresponding sections noted.These incorporations by reference were approved by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. These materials are available for purchase at the corresponding addresses noted below, and all are available for inspection at the Office of Manufactured Housing Programs, U.S. Department of Housing and Urban Development, 451 Seventh Street, SW, Room 9164, Washington, DC 20410; or the National Archives and Records Administration (NARA).For information on the availability of this material at NARA, call (202) 741-6030, or go to: http://www.archives.gov/federal-register/cfr/ibr-locations.html.B. The materials listed below are available for purchase from the Air Conditioning Contractors of America (ACCA), 2800 Shirlington Road, Suite 300, Arlington, Virginia 22206: 1. ACCA Manual J, Residential Load Calculation, 8th Edition, IBR approved for Subchapter F, Section III(A)(1)(a)(i).C. The materials listed below are available for purchase from APA-The Engineered Wood Association, 7011 South 19th Street, Tacoma, Washington 98411, telephone number (253) 565-6600, fax number (253) 565-7265: 1. PS1-95, Construction and Industrial Plywood (with typical APA trademarks), 1995 edition, IBR approved for Subchapter D, Section XII(A)(2)(a).D. The materials listed below are available for purchase from American Society of Heating, Refrigerating and Air Conditioning Engineers (ASHRAE), 1791 Tullie Circle, NE, Atlanta, Georgia 30329-2305: 1.ASHRAE Handbook of Fundamentals, 1997 Inch-Pound Edition, IBR approved for Subchapter F, Section III(A)(1)(a).E. The materials listed below are available for purchase from American Society for Testing and Materials (ASTM), 100 Barr Harbor Drive, West Conshohocken, Pennsylvania 19428-2959: 1. ASTM C 90-02a, Standard Specification for Loadbearing Concrete Masonry Units, 2002, IBR approved for Subchapter D, Section XII(A)(1)(a).2. ASTM D 1586-99, Standard Test Method for Penetration Test and Split-Barrel Sampling of Soils, 1999, IBR approved for Subchapter C, Section II(C).3. ASTM D 2487-00, Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System), 2000, IBR approved for Subchapter C, Section II(C).4. ASTM D 2488-00, Standard Practice for Description and Identification of Soils (Visual-Manual Procedure), 2000, IBR approved for Subchapter C, Section II(C).5. ASTM D3953-97, Standard Specification for Strapping, Flat Steel and Seals, 1997, IBR approved for Subchapter E, Section II(B)(2) and Note 10 to Table 1 to Subchapter E, Section II. F. The materials listed below are available for purchase from American Wood-Preservers' Association (AWPA), PO Box 388, Selma, Alabama 36702: 1. AWPA M4-02, Standard for the Care of Preservative-Treated Wood Products, 2002, IBR approved for Subchapter D, Section XII(A)(2)(c).2. AWPA U1-04, Use Category System; User Specification for Treated Wood, 2004, IBR approved for Subchapter D, Section III(B)(1), Subchapter D, Section XII(A)(2)(b), and Subchapter F, Section IV(C).G. The materials listed below are available for purchase from the Federal Emergency Management Administration (FEMA), 500 C Street, SW, Washington, DC 20472: 1. FEMA 85/September 1985, Manufactured Home Installation in Flood Hazard Areas, 1985, IBR approved for Subchapter B, Section II(D)(3).H. The materials listed below are available for purchase from the National Fire Protection Association (NFPA), 1 Batterymarch Park, Quincy, Massachusetts 02169-7471: 1. NFPA 31, Standard for the Installation of Oil Burning Equipment, 2001 edition, IBR approved for Subchapter J.2. NFPA 70, National Electrical Code, 2005 edition, IBR approved for Subchapter H, Section II(E)(1) and Subchapter J.3. NFPA 501A, Standard for Fire Safety Criteria for Manufactured Home Installations, Sites, and Communities, 2003 edition, IBR approved for Subchapter B, Section I. I. The materials listed below are available for purchase from the Structural Engineering Institute/American Society of Civil Engineers (SEI/ASCE), 1801 Alexander Bell Drive, Reston, Virginia 20191: 1. SEI/ASCE 32-01, Design and Construction of Frost Protected Shallow Foundations, 2001, IBR approved for Subchapter D, Section XII(B)(2)(b) and Subchapter D, Section XII(B)(3)(b).02-385 C.M.R. ch. 890, § A-IV