La. Admin. Code tit. 43 § XIII-507

Current through Register Vol. 50, No. 11, November 20, 2024

Section XIII-507 - What Documents are Incorporated by Reference Partly or Wholly in this Part? [49 CFR 192.7]

A. Certain material is incorporated by reference into this Subpart with the approval of the Director of the Federal Register under 5 U.S.C. 552(a) and 1 CFR part 51 . The materials listed in this Section have the full force of law. All approved material is available for inspection at Office of Pipeline Safety, Pipeline and Hazardous Materials Safety Administration, 1200 New Jersey Avenue S.E., Washington, D.C. 20590, 202-366-4046 https://www.phmsa.dot.gov/pipeline/regs, and at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, email fr.inspection@nara.gov or go to www.archives.gov/federal-register/cfr/ibr-locations.html. It is also available from the sources in the following paragraphs of this section. [49 CFR 192.7(a)]

1. - 2. Repealed.

Source and Name of Referenced Material	Approved for Title 43 Reference
A. Pipeline Research Council International (PRCI):
(1) AGA Pipeline Research Committee, Project PR-3-805, "A Modified Criterion for Evaluating the Remaining Strength of Corroded Pipe" (December 22, 1989). The RSTRENG program may be used for calculating remaining strength.	§ 2137 C; 3333.A.1; 3333.D.1.a;
B. American Petroleum Institute (API), 200 Massachusetts Ave N.W., Suite 1100, Washington, D.C. 20001, and phone: 202-682-8000, Web site: https://www.api.org/.
1. API Recommended Practice 5L1, "Recommended Practice for Railroad Transportation of Line Pipe," 7th edition, September 2009, (API RP 5L1).	§ 715 A
2. API Recommended Practice 5LT, "Recommended Practice for Truck Transportation of Line Pipe," First edition, March 2012, (API RP 5LT).	§ 715 C
3. API Recommended Practice 5LW, "Recommended Practice for Transportation of Line Pipe on Barges and Marine Vessels," 3rd edition, September 2009, (API RP 5LW).	§ 715 B
4. API Recommended Practice 80, "Guidelines for the Definition of Onshore Gas Gathering Lines," 1st edition, April 2000, (API RP 80).	§ 508 A
5. API Recommended Practice 1162, "Public Awareness Programs for Pipeline Operators," 1st edition, December 2003, (API RP 1162).	§2716 A; 2716.B; 2716.C
6. API Recommended Practice 1165, "Recommended Practice for Pipeline SCADA Displays," First edition, January 2007, (API RP 1165).	§ 2731 C
7. API Specification 5L, "Specification for Line Pipe," 45th edition, effective July 1, 2013, (API Spec 5L).	§705 E; 912.A-E; 913; Item I of 5103
8. ANSI/API Specification 6D, "Specification for Pipeline Valves," 23rd edition, effective October 1, 2008, including Errata 1 (June 2008), Errata 2 (/November 2008), Errata 3 (February 2009), Errata 4 (April 2010), Errata 5 (November 2010), Errata 6 (August 2011) Addendum 1 (October 2009), Addendum 2 (August 2011), and Addendum 3 (October 2012), (ANSI/API Spec 6D).	§ 1105 A
9. API Standard 1104, "Welding of Pipelines and Related Facilities," 20th edition, October 2005, including errata/addendum (July 2007) and errata 2 (2008), (API Std 1104),	§1305 A; 1307.A; 1309.C; 1321.C; Item II, 5103.
10. API Recommended Practice 1170, "Design and Operation of Solution-mined Salt Caverns Used for Natural Gas Storage," First edition, July 2015 (API RP 1170).	§512
11 API Recommended Practice 1171, "Functional Integrity of Natural Gas Storage in Depleted Hydrocarbon Reservoirs and Aquifer Reservoirs," First edition, September 2015, (API RP 1171).	§512
12. API STANDARD 1163, "In-Line Inspection Systems Qualification," Second edition, April 2013, Reaffirmed August 2018, (API STD 1163).	§2145
C. ASME International (ASME), Two Park Avenue, New York, NY 10016, 800-843-2763 (U.S/Canada), Web site: http://www.asme.org/.
1. ASME/ANSI B16.1-2005, "Gray Iron Pipe Flanges and Flanged Fittings: (Classes 25, 125, and 250)," August 31, 2006, (ASME/ANSI B16.1).	§ 1107 C
2. ASME/ANSI B16.5-2003, "Pipe Flanges and Flanged Fittings," October 2004, (ASME/ANSI B16.5).	§1107 A; 1509; 2707
3. ASME B16.40-2008, "Manually Operated Thermoplastic Gas Shutoffs and Valves in Gas Distribution Systems," March 18, 2008, approved by ANSI, (ASME B16.40-2008).	§5103, Item 1
4. ASME/ANSI B31G-1991 (Reaffirmed 2004), "Manual for Determining the Remaining Strength of Corroded Pipelines," 2004, (ASME/ ANSI B31G).	§2137 C; 2732.A; 2912.B; 3333.A
5. ASME/ANSI B31.8-2007, "Gas Transmission and Distribution Piping Systems," November 30, 2007, (ASME/ANSI B31.8)	§912 A
6. ASME/ANSI B31.8S-2004, "Supplement to B31.8 on Managing System Integrity of Gas Pipelines," approved January 14, 2005, (ASME/ANSI B31.8S)	§513 D; 2914.C and D; 3303 note to potential impact radius; 3307; 3311.A, A.9 and A.11 thru A.13; 3313.A thru C; 3317.A thru E; 3321.A; 3323.B; 3325.B; 3327.B and C; 3329.B; 3333.C and D; 3335.A and B; 3337.C; 3339.A; 3345.A
7. Reserved.
8. ASME Boiler and Pressure Vessel Code, Section VIII, Division 1 "Rules for Construction of Pressure Vessels," 2007 edition, July 1, 2007, (ASME BPVC, Section VIII, Division 1).	§1113.A, B and D; 1125.B
9. ASME Boiler and Pressure Vessel Code, Section VIII, Division 2 "Alternate Rules, Rules for Construction of Pressure Vessels," 2007 edition, July 1, 2007, (ASME BPVC, Section VIII, Division 2)	§1113.B and D; 1125.B
10. ASME Boiler and Pressure Vessel Code, Section IX: "Qualification Standard for Welding and Brazing Procedures, Welders, Brazers, and Welding and Brazing Operators," 2007 edition, July 1, 2007, ASME BPVC, Section IX.	§1305 A; 1307.A; and 5103 Item II
D. American Society for Nondestructive Testing (ASNT), P.O. Box 28518, 1711 Arlingate Lane, Columbus, OH 43228, phone: 800-222-2768, website: https://www.asnt.org/.
1. ANSI/ASNT ILI - PQ - 2005(2010), "Inline Inspection Personnel Qualification and Certification," Reapproved October 11, 2010, (ANSI/ ASNT ILI - PQ)	§§ 913; 5103 Item I
2. [Reserved]
3 - 15. Repealed.
E. ASTM International (formerly American Society for Testing and Materials), 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428, phone: (610) 8329585, Web site: http://astm.org
1. ASTM A53/A53M-10, "Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless," approved October 1, 2010, (ASTM A53/A53M)	§§ 913; 5103 Item I
2. ASTM A106/A106M-10, "Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service," approved October 1, 2010, (ASTM A106/A106M)	§§ 913; 5103 Item I
3. ASTM A333/A333M-11, "Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service," approved April 1, 2011, (ASTM A333/A333M)	§§ 913; 5103 Item I
4. ASTM A372/A372M-10, "Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels," approved October 1, 2010, (ASTM A372/A372M)	§1137 B
5. ASTM A381-96 (reapproved 2005), "Standard Specification for Metal-Arc Welded Steel Pipe for Use with High-Pressure Transmission Systems," approved October 1, 2005, (ASTM A381)	§§ 913; 5103 Item I
6. ASTM A578/A578M-96 (reapproved 2001), "Standard Specification for Straight-Beam Ultrasonic Examination of Plain and Clad Steel Plates for Special Applications," (ASTM A578/A578M)	§ 912 C
7. ASTM A671/A671M-10, "Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures," approved April 1, 2010, (ASTM A671/A671M)	§§ 913; 5103 Item I
8. ASTM A672/A672M-09, "Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures," approved October 1, 2009, (ASTM A672/672M)	§§ 913; 5103 Item I
9. ASTM A691/A691M-09, "Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures," approved October 1, 2009, (ASTM A691/A691M)	§§ 913; 5103 Item I
10. ASTM D638-03, "Standard Test Method for Tensile Properties of Plastics," 2003, (ASTM D638)	§1513 A; 1513.B
11. (ASTM D2513-12ae1). ASTM D2513-18a, "Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings," approved August 1, 2018, (ASTM D2513),	§5103, Item 1
12. ASTM D2517-00, "Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings," (ASTM D 2517).	§1151 A; 1511.D; 1513.A; 5103 Item I
13. ASTM D2564-12, "Standard Specification for Solvent Cements for Poly (Vinyl Chloride) (PVC) Plastic Piping Systems," Aug. 1, 2012, (ASTM D2564-12).	§ 1511.B 2
14. ASTM F1055-98 (Reapproved 2006), "Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene Pipe and Tubing," March 1, 2006, (ASTM F1055-98 (2006)).	§1513 A; 5103 Item I
15. ASTM F1924-12, "Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing," April 1, 2012, (ASTM F1924-12).	§ 5103 Item I
16. ASTM F1948-12, "Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing," April 1, 2012, (ASTM F1948-12).	§ 5103 Item I
17. ASTM F1973-13, "Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems," May 1, 2013, (ASTM F1973-13)	§1164 B; 5103 Item I
18. ASTM F2145-13, "Standard Specification for Polyamide 11 (PA 11) and Polyamide 12 (PA12) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide 11 and Polyamide 12 Pipe and Tubing," May 1, 2013, (ASTM F2145-13)	§ 5103 Item I
19. ASTM F 2600-09, "Standard Specification for Electrofusion Type Polyamide-11 Fittings for Outside Diameter Controlled Polyamide-11 Pipe and Tubing," April 1, 2009, (ASTM F 2600-09)	§ 5103 Item I
20. ASTM F2620-19, "Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings," approved February 1, 2019, (ASTM F2620),	§1511 C; 1515.B
21. ASTM F2767-12, "Specification for Electrofusion Type Polyamide-12 Fittings for Outside Diameter Controlled Polyamide-12 Pipe and Tubing for Gas Distribution," Oct. 15, 2012, (ASTM F2767-12)	§ 5103 Item I
22. ASTM F2785-12, "Standard Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings," Aug. 1, 2012, (ASTM F2785-12)	§ 5103 Item I
23. ASTM F2817-10, "Standard Specification for Poly (Vinyl Chloride) (PVC) Gas Pressure Pipe and Fittings for Maintenance or Repair," Feb. 1, 2010, (ASTM F2817-10)	§ 5103 Item I
24. ASTM F2945-12a "Standard Specification for Polyamide 11 Gas Pressure Pipe, Tubing, and Fittings," Nov. 27, 2012, (ASTM F2945-12a)	§ 5103 Item I
F. Gas Technology Institute (GTI), formerly the Gas Research Institute (GRI)), 1700 S. Mount Prospect Road, Des Plaines, IL 60018, phone: 847-768-0500, Web site: http://www.mss-hq.org/.
1. GRI 02/0057 (2002) "Internal Corrosion Direct Assessment of Gas Transmission Pipelines Methodology"	§ 3327 C
2. [Reserved]
3 NFPA 59 (2004) "Utility LP-Gas Plant Code"	§ 511 A; 511.B; 511.C
4 NFPA 70 (2008) "National Electrical Code" (NEC 2008) (Approved August 15, 2007)	§ 1123 E; 1149.C
G. Manufacturers Standardization Society of the Valve and Fittings Industry, Inc. (MSS), 127 Park St. NE., Vienna, VA 22180, phone: 703-281-6613, Web site: http://www.mss-hq.org/.
1. MSS SP-44-2010, Standard Practice, "Steel Pipeline Flanges," 2010 edition, (including Errata (May 20, 2011)), (MSS SP-44).	§ 1107 A
2. [Reserved]
H. NACE International (NACE), 1440 South Creek Drive, Houston, TX 77084: phone: 281-228-6223 or 800-797-6223, Web site: http://www.nace.org/Publications/.
1. ANSI/NACE SP0502-2010, Standard Practice, "Pipeline External Corrosion Direct Assessment Methodology," revised June 24, 2010, (NACE SP0502).	§3323 B; 3325.B; 3331.D; 3335.B; 3339.A
2. NACE Standard Practice 0102 - 2010, "InLine Inspection of Pipelines," Revised 2010 - 03 - 13, (NACE SP0102).	§1110 A; 2145
3. NFPA-59 (2004), "Utility LP-Gas Plant Code," (NFPA-59).	§511 A, 511 B, 511 C
4. NFPA-70 (2011), "National Electrical Code," 2011 edition, issued August 5, 2010, (NFPA-70).	§1123 E, 1149 C
1. NACE Standard Practice 0102 -2010, "In-Line Inspection of Pipelines," Revised 2010-03-13, (NACE SP0102)	§1110 A; 2145
2. NACE SP0204-2008, Standard Practice, "Stress Corrosion Cracking (SCC) Direct Assessment Methodology," reaffirmed September 18, 2008, (NACE SP0204)	§3323 B; 3329.B introductory text, B.1 thru B.3, B.5 introductory text, and B.5.a
3. NACE SP0206-2006, Standard Practice, "Internal Corrosion Direct Assessment Methodology for Pipelines Carrying Normally Dry Natural Gas (DG-ICDA)," approved December 1, 2006	§3323 B; 3327.B, C introductory text, and C.1 thru C.4
4. ANSI/NACE SP0502-2010, Standard Practice, "Pipeline External Corrosion Direct Assessment Methodology," revised June 24, 2010, (NACE SP0502)	§1719 F; 2113.H; 3323.B; 3325.B; 3331.D; 3335.B; 3339.A
I. National Fire Protection Association (NFPA), 1 Batterymarch Park, Quincy, Massachusetts 02169, phone: 1 617 984-7275, Web site: http://www.nfpa.org/.
1. NFPA-30 (2012), "Flammable and Combustible Liquids Code," 2012 edition, June 20, 2011, including Errata 30-12-1 (September 27, 2011) and Errata 30-12-2 (November 14, 2011), (NFPA-30).	§2935 B
2. NFPA-58 (2004), "Liquefied Petroleum Gas Code (LP-Gas Code)," (NFPA-58).	§511 A; 511.B; 511.C
3. NFPA-59 (2004), "Utility LP-Gas Plant Code," (NFPA-59).	§511 A; 511.B; 511.C
4. NFPA-70 (2011), "National Electrical Code," 2011 edition, issued August 5, 2010, (NFPA-70).	§1123 E; 1149.C
J. Pipeline Research Council International, Inc. (PRCI), c/o Technical Toolboxes, 3801 Kirby Drive, Suite 520, P.O. Box 980550, Houston, TX 77098, phone: 713-630-0505, toll free: 866-866-6766, Web site: http://www.ttoolboxes.com/. (Contract number PR-3-805.)
1. AGA, Pipeline Research Committee Project, PR-3-805, "A Modified Criterion for Evaluating the Remaining Strength of Corroded Pipe," (December 22, 1989), (PRCI PR-3-805 (R-STRENG)).	§2732 A; 2912.B; 3333.A; 3333.D
2. [Reserved]
K. Plastics Pipe Institute, Inc. (PPI), 105 Decker Court, Suite 825 Irving TX 75062, phone: 469-499-1044, http://www.plasticpipe.org/.
1. PPI TR-3/2012, HDB/HDS/PDB/SDB/MRS/CRS, Policies, "Policies and Procedures for Developing Hydrostatic Design Basis (HDB), Hydrostatic Design Stresses (HDS), Pressure Design Basis (PDB), Strength Design Basis (SDB), Minimum Required Strength (MRS) Ratings, and Categorized Required Strength (CRS) for Thermoplastic Piping Materials or Pipe," updated November 2012, (PPI TR-3/2012)	§ 921
2. PPI TR-4, HDB/HDS/SDB/MRS, Listed Materials, "PPI Listing of Hydrostatic Design Basis (HDB), Hydrostatic Design Stress (HDS), Strength Design Basis (SDB), Pressure Design Basis (PDB) and Minimum Required Strength (MRS) Rating For Thermoplastic Piping Materials or Pipe," updated March, 2011, (PPI TR-4/2012)	§ 921

La. Admin. Code tit. 43, § XIII-507

Promulgated by the Department of Natural Resources, Office of Conservation, LR 30:1226 (June 2004), amended LR 31:680 (March 2005), LR 33:474 (March 2007), LR 35:2801 (December 2009), LR 38:113 (January 2012), Amended LR 441033 (6/1/2018), Amended LR 4568 (1/1/2019), Amended LR 461578 (11/1/2020), Amended LR 471141 (8/1/2021), Amended LR 501247 (9/1/2024).

AUTHORITY NOTE: Promulgated in accordance with R.S. 30:501 et seq.