La. Admin. Code tit. 43 § XIII-1103

Current through Register Vol. 50, No. 11, November 20, 2024

Section XIII-1103 - General Requirements [49 CFR 192.143]

A. Each component of a pipeline must be able to withstand operating pressures and other anticipated loadings without impairment of its serviceability with unit stresses equivalent to those allowed for comparable material in pipe in the same location and kind of service. However, if design based upon unit stresses is impractical for a particular component, design may be based upon a pressure rating established by the manufacturer by pressure testing that component or a prototype of the component. [ 49 CFR 192.143(a)]

B. The design and installation of pipeline components and facilities must meet applicable requirements for corrosion control found in Chapter 21 of this Subpart. [ 49 CFR 192.143(b)]

C. Except for excess flow valves, each plastic pipeline component installed after January 22, 2019 must be able to withstand operating pressures and other anticipated loads in accordance with a listed specification. [49 CFR 192.143(c)]

La. Admin. Code tit. 43, § XIII-1103

Promulgated by the Department of Natural Resources, Office of Conservation, LR 9:223 (April 1983), amended LR 10:515 (July 1984), LR 30:1232 (June 2004), LR 35:2805 (December 2009), Amended LR 461584 (11/1/2020).

AUTHORITY NOTE: Promulgated in accordance with R.S. 30:501 et seq.