La. Admin. Code tit. 43 § XI-4321

Current through Register Vol. 50, No. 11, November 20, 2024

Section XI-4321 - Fittings

A. Butt-welding type fittings must meet the marking, end preparation, and the burst strength requirements of ASME/ANSI B16.9 or MSS SP-75 (incorporated by reference, see §3907).

B. There may not be any buckles, dents, cracks, gouges, or other defects in the fitting that might reduce the strength of the fitting.

C. The fitting must be suitable for the intended service and at least as strong as the pipe and other fittings in the pipeline system to which it is attached.

La. Admin. Code tit. 43, § XI-4321

Promulgated by the Department of Natural Resources, Office of Conservation, LR 12:115 (February 1986), repromulgated LR 49311 (2/1/2023), Amended LR 49907 (5/1/2023).

AUTHORITY NOTE: Promulgated in accordance with R.S. 30:4(C)(17) and R.S. 30:1104(A).