La. Admin. Code tit. 43 § XI-1321

Current through Register Vol. 50, No. 12, December 20, 2024

Section XI-1321 - Fittings

A. Butt-welding type fittings must meet the marking, end preparation, and the burst strength requirements of ANSI B16.9 or MSS Standard Practice SP-75.

B. There may not be any buckles, dents, cracks, gouges, or other defects in the fitting that might reduce the strength of the fitting.

C. The fitting must be suitable for the intended service and at least as strong as the pipe and other fittings in the pipeline system to which it is attached.

La. Admin. Code tit. 43, § XI-1321

Promulgated by the Department of Natural Resources, Office of Conservation, LR 12:115 (February 1986).

AUTHORITY NOTE: Promulgated in accordance with R.S. 30:4(C)(17).