Decommissioning-ending wind energy operations andreturning the lease to a condition that meets the requirements of the Minerals Management Service, U.S. Department of the Interior, as required by R.S. 41:1732.C, as well as the requirements of the Louisiana Department of Natural Resources, State Mineral Board and Office of Mineral Resources, and the requirements of any other agencies that have jurisdiction over decommissioning activities.
Facility-any installation used for wind energy activities that is permanently or temporarily attached to state lands or water bottoms. Facilities may include obstructions.
Obstructions-structures, equipment or objects that were used in wind energy operations that, if left in place, would hinder other users of the state lands or water bottoms. Obstructions may include, but are not limited to, wind turbines, towers, pads, platforms, templates, pilings, shell mounds, overhead and underground electrical transmission and communications lines, electric transformers, energy storage facilities, telecommunications equipment, power generation facilities, roads, meteorological towers and wind measurement equipment, control buildings, maintenance yards, transmission towers, wires, cables, substations, and related facilities and equipment.
Decommissioning Applications and Reports Table | ||
Decommissioning Applications and Reports | When to Submit | Instructions |
1. Final removal application for a facility | Before removing a facility | Include information required under Subpart G |
2. Post-removal report for a facility | Within 30 days after you remove a facility | Include information required under Subpart I |
3. Site clearance report for a facility | Within 30 days after you complete site clearance verification activities | Include information required under Subpart N |
For- | You Must Trawl- | And You Must- |
1. Buried active pipelines | First contact the pipeline owner or operator to determine the condition of the pipeline before trawling over the buried pipeline. | |
2. Unburied active pipelines that are 8 inches in diameter or larger | no closer than 100 feet to the either side of the pipeline | Trawl parallel to the pipeline. Do not trawl across the pipeline. |
3. Unburied smaller diameter active pipelines in the trawl area that have obstructions (e.g., pipeline valves) present | no closer than 100 feet to either side of the pipeline | Trawl parallel to the pipeline. Do not trawl across. |
4. Unburied active pipelines in the trawl area that are smaller than 8 inches in diameter and have no obstructions present. | parallel to the pipeline |
If You Use- | You Must- | And You Must- |
1. Sonar | Cover 100 percent of the appropriate grid area. | Use a sonar signal with a frequency of at least 500 kHz. |
2. A diver | Ensure that the diver visually inspects 100 percent of the appropriate grid area. | Ensure that the diver uses a search pattern of concentric circles or parallel lines spaced no more than 10 feet apart. |
3. An ROV (remotely operated vehicle) | Ensure that the ROV camera records videotape over 100 percent of the appropriate grid area. | Ensure that the ROV uses a pattern of concentric circles or parallel lines spaced no more than 10 feet apart. |
La. Admin. Code tit. 43, § V-733