La. Admin. Code tit. 42 § XI-2413

Current through Register Vol. 50, No. 11, November 20, 2024

Section XI-2413 - Devices

A. Device Specifications

1. All devices shall include all of the specifications and features as provided in R.S. 27:405. In addition, all devices shall include the following specifications and features:

a. a video display screen utilizing a cathode ray tube or other display device as approved by the division and microprocessors in order for a person or persons to view the actual games;

b. a maximum expected payback value for one credit that shall not exceed 94 percent of the value of a credit based on optimum operating play strategy;

c. a pay table for each hand of poker which shall be conspicuously displayed;

d. accept only United States coins and/or currency;

e. display only information on the screen or housing that has been approved, in writing, by the division. In addition:

i. all information required for external display shall be kept under a pre-approved transparent material, (i.e., shatterproof glass or Plexiglas); and

ii. the phrase "NO PERSON UNDER THE AGE OF 21 ALLOWED TO PLAY" shall be conspicuously displayed on the face of all devices;

f. fully functioning electronic (soft) meters and mechanical (hard) meters capable of displaying accurate monetary transactions and printing a record of those transactions. In addition, the electronic (soft) meters shall be capable of printing an accurate record of the monetary transactions:

i. any device that produces inaccurate electronic (soft) meter data shall be disabled or removed from play immediately upon notification, from the division, that it is incapable of displaying and printing accurate monetary transactions. The device shall remain disabled until testing and repair forms indicate that soft meters are accurately recording monetary transactions;

g. electronic (soft) meters that shall retain the following transactions for a period of no less than 180 days, including:

i. credits in;

ii. credits played;

iii. credits won;

iv. credits paid out;

v. number of games played;

vi. number of games won;

vii. credit for games won but not collected (i.e., credit balance);

viii. number of times logic area is accessed; and

ix. number of times cash door is accessed;

h. main logic board and printed circuit board which shall contain a game EPROM or other secure media memory storage device as approved by the division, and which shall be separate in a locked area of the device. All logic boards shall have a nonremovable number affixed or inscribed;

i. permanent serial numbers not to exceed nine alpha and/or numeric characters. The serial number plate shall be located in the upper (front) right side panel of the device and shall contain the following information:

i. serial number of the device;

ii. manufacturer's name;

iii. model number of the device; and

iv. date of assembly of the device;

j. line filter and surge protector that shall control all A.C. electrical current to the device, and a back-up or alternate power supply source capable of maintaining the integrity of all electronic meters and the time and date functions for a 30-day period during any power fluctuation or total power loss. In addition:

i. the battery or back-up power source shall be in a state of charge or readiness during the normal operation of the device; and

ii. all devices shall pass a static discharge test before being certified (the test shall be uniform for all similar devices);

k. games which shall be random and shall be tested to at least a 99 percent certainty using a standard correlation test or analysis (a correlation test or analysis for purposes of this Section is defined as the process by which each card or number position is chosen independently without regard to any other card or number drawn within that game play);

l. an approved and fully functioning security system that shall temporarily disable the gaming function of the device while the device is open. If there is a breach of security, all devices shall notify the central computer system via electronic signal upon polling;

m. a circuit-interrupting device, method, or capability which shall disable the operation of the device if the division approved program of the device is accessed or altered;

n. a lockout mechanism which prohibits the device from accepting coins and currency during the play of a hand;

o. construction which meets UL-22 or CSA/NRTL standards approved;

p. a ticket voucher printing system located in a locked compartment of the device in order to safeguard the audit copy. In addition:

i. printing of all totals from the meters shall occur automatically by means of a switch attached to the locking mechanism each time the device is accessed;

ii. the printing system shall have a paper sensing device that prevents play and disables the device if there is insufficient paper to print a ticket voucher for a player or an audit copy. Upon sensing the "paper low" or "paper out" signal, the device shall finish printing the ticket voucher for the last game played and prevent further play; and

iii. the paper contained in the printing mechanism for the printing of the ticket vouchers and the audit copy shall be of a type which diminishes the ability to copy, alter, or falsify;

iv. all device owners shall retain the door ticket for a period of not less than 90 days. The door ticket may be scanned and retained electronically.

q. upon command, be able to display the most recent game history of at least two plays, including the current game play;

r. meet the required central computer communications protocol requiring compatibility with the system during the enrollment procedure. A security related data exchange shall occur between the device and the central computer prior to the transmission of any information. Failure of the device to send the appropriate data back to the central computer shall indicate a communication failure and shall preclude operation of the device. In addition:

i. if a device is not polled by the central computer within the specified time period, the device shall automatically become disabled; and

ii. all devices shall report electronically as required or it may be disabled by the division; and

s. a feature that shall accept a "shutdown" command from the central computer and obey that command.

2. Devices shall not have any switches, jumpers, wire posts, or any other means of manipulation that could be used to affect the outcome of a game.

3. Devices shall not have any functions or parameters which are adjustable by or through any separate video display or input codes, except for adjustment features which are cosmetic.

4. A valid ticket voucher shall contain all information required by R.S. 27:406. In addition, a valid ticket voucher shall contain the program name and/or software number.

5. Devices shipped to and transported through Louisiana shall at all times remain in the demonstration mode or other non-functioning mode. In addition, after January 1, 1996, no device operating in demonstration mode shall accept coin or currency.

6. All manufacturers shall submit to the division and its designated testing facility, in writing, a complete description, explanation, and location of all hidden icons.

B. Testing of Video Gaming Devices

1. The division shall supply all licensed manufacturers with a timetable for the implementation of acceptance testing and adaptability of the video gaming devices to the central computer of the division.

2. All manufacturers shall supply the division with timetables and guidelines for accomplishing tasks involved in the acceptance testing of video gaming devices within the division parameters. This shall include system functions and communication procedures of information to and from the division's central computer and the devices.

3. Upon request by the division, all manufacturers shall be required to provide assistance in troubleshooting, communication and technical problems once the devices are placed at the licensed establishments, at no cost to the division.

4. Upon request by the division, all manufacturers shall submit schematic diagrams, illustrations, technical and operational manuals, program source codes, and other information necessary for the operation, maintenance, and testing of the devices. Such information shall remain confidential.

5. Testing of the devices shall require that working models of devices, associated equipment, and documentation described above be transported to locations specified by the division for examination and analysis.

6. The testing, examination, and analysis of the devices may require dismantling of devices, and some tests may result in permanent damage to one or more components. All manufacturers shall be required to provide additional parts or components to complete testing, and specialized testing equipment to ensure integrity and durability to the satisfaction of the division. In addition:

a. all manufacturers shall submit all hardware, software, and testing equipment for the testing of their video gaming devices;

b. all devices shall have built in diagnostic functions for the testing of all major components as defined by the division;

c. the quality of the hardware, software, and components submitted for testing shall be of the same quality as that in devices offered to licensees; and

d. no device shall contain software that has any transparent codes, security features, or passwords, that would or could evoke any functions, or sub-routines that would alter any game characteristics, required features, specifications, or device capabilities such as pay tables, payout percentages, or counters.

7. The division may accept the results of testing done by division-approved independent laboratories which were performed on specified devices at the request of the division.

8. All manufacturers shall bear all costs associated with initial device testing and subsequent testing and investigation.

C. Device Modifications

1. No device shall be altered or modified, temporarily or permanently, without prior written approval from the division.

2. Unauthorized modifications of any type shall be grounds for immediate suspension and/or revocation, in accordance with these rules and the Act.

D. Enrollment Procedures

1. Once a licensed establishment receives a video gaming license, the device owner may file the necessary paperwork to notify the division in order to initiate enrollment procedures.

2. No device shall be enrolled into the central computer system without proper coordination and security procedures between the central computer office personnel and authorized personnel at the licensed establishment where the devices are located.

3. Validation decals shall be issued by the division for devices and shall be promptly affixed by a division representative to an enrolled device. The validation decal shall be affixed to the upper (front) right side of the device, or as otherwise approved by the division.

E. Maintenance

1. Only certified technicians may access the interior of an enrolled and enabled video gaming device. Access includes routine maintenance, repairs or replacement of parts, paper, etc.

2. A certified technician level 1 and certified technician level 2 shall only be employed by an entity that is licensed by the division.

3. A certified technician level 2 must be certified by the manufacturer for the specific devices he works on.

4. Access of video draw poker devices by certified technicians, levels 1 and 2, must be authorized in writing by the device owner prior to accessing any device.

5. A device owner who authorizes a certified technician to access the device owner's video draw poker gaming device(s) is responsible for any actions by the certified technician that would constitute a violation of these regulations or the Act.

6. Access to any video draw poker gaming device by an unauthorized certified technician or by an individual who does not possess a current and valid certified technician permit, whether or not access by the uncertified individual was authorized by the device owner, is a violation of these regulations and the Act. The device owner shall be responsible for such violation. In addition, the device owner shall be responsible for any actions by an unauthorized certified technician or an uncertified individual who accesses the video draw poker gaming device(s) that would constitute a violation of these regulations or the Act.

7. All device owners shall maintain a current, written maintenance log for each video draw poker gaming device operating within a licensed establishment, on a form approved by the division, for the purpose of keeping records of routine maintenance and repairs. All log entries shall contain the following information:

a. time and date of access of the video draw poker gaming device;

b. reason for access of the video draw poker gaming device;

c. any time the logic board is accessed or meter readings are altered, mechanical (hard) and electronic (soft) meter readings of the video draw poker gaming device;

d. the signed and printed name and state issued permit number of the certified individual accessing the video draw poker gaming device;

e. area of the video draw poker gaming device accessed; and

f. time and date the video draw poker gaming device was secured.

8. A division-approved RAM clear chip and procedure shall be used when a video draw poker gaming device's memory is to be cleared.

9. Whenever a video draw poker gaming device's software program is to be changed or upgraded, prior approval shall be obtained from the division, and the video draw poker gaming device's memory shall be cleared using a division-approved RAM clear chip.

10. Only licensed manufacturers, licensed distributors, and division personnel are allowed to possess RAM clear chips for video draw poker gaming devices.

11. Use of any other method to clear a video draw poker gaming device memory is prohibited unless specifically authorized by the division.

12. The division shall be notified before a video draw poker gaming device is disconnected from the division's central computer.

13. A video draw poker gaming device may not be substituted or replaced until the replacement video draw poker gaming device has been approved by the division and the proper validation decal has been affixed.

F. Device Security and Shipments

1. Any licensee who is shipping devices into, within, or from this state for any purpose shall provide the division with information relating to those shipments, in writing, on a form provided by the division. No licensee shall ship any device until the shipment is approved by the division.

2. The shipper shall provide the division with the make, model, serial number, and an inventory of the devices being shipped.

3. The division shall be notified at least three business days prior to shipment of any device.

4. The devices shall be shipped within 10 business days of the shipment notification. The division shall be notified immediately by the shipper if the devices cannot be moved within the time frame specified on the shipment notification. A copy of the completed form containing the approval for shipment shall be in the possession of the carrier during shipment of the listed devices.

5. All manufacturers, distributors, and device owners who ship devices to a destination other than an approved location by the division, shall be subject to suspension or revocation of their license or the imposition of a fine.

G. Damage to or Theft from Devices

1. Upon discovery of damage to or theft from a video gaming device, the device owner, licensed establishment owner, or a designated representative of the licensed establishment shall request the local law enforcement agency to investigate.

2. After investigation by local law enforcement authorities, the device owner shall obtain and forward the following reports to the division:

a. service/repair report with the electronic (soft) and mechanical (hard) meter readings from the device with an audit ticket attached. The meter readings shall be taken as soon as possible after the discovery of damage or theft; and

b. when possible, an offense/complaint report from the local enforcement agency.

3. The device owner or licensed establishment owner shall immediately notify the division, in writing, of any damage to or theft from a device.

H. Devices Permanently Removed from Service

1. When a device is permanently removed from service by a licensed device owner, the validation decal shall be removed by that device owner and shall be returned to the division with the completed device transfer report provided by the division.

2. The completed device transfer report shall be submitted to the division within five business days by the United States Postal Service certified or registered mail, return receipt requested or private or commercial interstate carrier.

3. No devices which are permanently removed from service shall have a validation decal displayed on it.

4. For purposes of this Section, devices permanently removed from service shall mean devices:

a. that are sold back or otherwise returned, and shipped to the distributor or manufacturer;

b. that are damaged beyond repair due to theft, vandalism, or natural disasters; or

c. that are completely dismantled for parts or destroyed and properly discarded as waste.

5. If a device is damaged beyond repair due to theft, vandalism, or natural disaster, the device owner may petition the division in writing for a device operation fee credit, to be applied to a replacement device of the same make and model, in the amount previously received by the division for the device to be replaced.

I. Contraband Equipment and Unregulated Devices

1. No licensee shall place or allow the placement of any video gaming device in any establishment unless the device is placed pursuant to the provisions of these regulations and the Act.

2. No licensee may possess or offer for play any unlicensed device, or any other gambling device as defined in R.S. 15:31, whether electronic or mechanical, that plays, emulates, or simulates the game of draw poker and contains a circuit, meter, or switch capable of recording the removal of credits earned by a player or any variation thereof. Possession of such contraband devices shall constitute a violation of the division's rules and the law.

J. Disabling or Seizure of Devices

1. The division shall have the authority to disable and/or seize any device at any location when a violation of the Act occurs, in accordance with the procedure provided therein.

2. In those cases where the division determines that the device owner was not responsible for or involved in, the violation of the Act, the device(s) may be returned to the device owner.

K. Warehouses

1. Devices stored in a warehouse shall be stored in a manner which easily displays the device serial number plate and/or the state issued permit sticker.

2. Device owners who wish to share warehouse space must execute a written lease agreement outlining the conditions and method of the space sharing. A copy of the lease agreement, along with a diagram indicating the method of device separation, must be sent to the division within five calendar days from the date of execution.

a. The shared warehouse must be partitioned in such a manner as to visually distinguish each device owner's video gaming devices.

b. Device owners shall not commingle their video gaming devices.

L. Device Parts

1. Licensed distributors and device owners shall purchase parts for video draw poker devices according to the following provisions.

a. Logic boards, EPROM's, media memory storage devices, or any other proprietary parts of a video draw poker device shall be purchased from a licensed video draw poker manufacturer or distributor.

b. Video draw poker device monitors and bill/coin acceptors may be purchased directly from the original equipment manufacturer, if available. After market device monitors and bill/coin acceptors may be purchased from sources other than a licensed manufacturer or distributor and used only if the part has been tested and approved for use in a video draw poker device by a division-approved testing facility.

c. Any other replacement parts of a video draw poker device may be purchased from sources other than a licensed manufacturer or distributor if:

i. the parts are of equal or better quality than the original device parts; and

ii. the parts have no effect on the security, integrity, or outcome of the game.

La. Admin. Code tit. 42, § XI-2413

Promulgated by the Department of Public Safety and Corrections, Office of State Police, Gaming Enforcement Section, Video Gaming Division, LR 18:197 (February 1992), amended LR 21:582 (June 1995), amended by the Department of Public Safety and Corrections, Gaming Control Board, LR 23:1322 (October 1997), LR 25:85 (January 1999), LR 30:269 (February 2004), repromulgated LR 30:446 (March 2004), amended LR 32:109 (January 2006), LR 32:1613 (September 2006), LR 40:1109 (June 2014), repromulgated LR 40:1382 (July 2014), amended LR 40:1384 (July 2014), Amended LR 4972 (1/1/2023).

AUTHORITY NOTE: Promulgated in accordance with R.S. 33:4862.1 et seq. and R.S. 27:1 et seq.