Kan. Admin. Regs. § 112-107-7

Current through Register Vol. 43, No. 49, December 5, 2024

Section 112-107-7 - Gaming floor plan

(a) Each applicant or gaming facility manager shall submit to the commission a floor plan of its gaming floor and the restricted areas servicing the electronic gaming operation. The floor plan shall include depictions drawn to a scale of 1/8 inch per foot, unless another scale is approved by the executive director, of the following:

(1) Each EGM area on the gaming floor and each EGM location within each EGM area. EGM locations shall be identified by number;

(2) the cage and any satellite cage, including each cage window and window number;

(3) each count room and any trolley storage area;

(4) each automated bill validator, gaming ticket redemption machine, coupon redemption machine, and jackpot payout machine;

(5) each automated teller machine;

(6) each area designated for the storage or repair of EGMs;

(7) the location of each vault and armored car bay; and

(8) any additional documentation requested by the executive director relating to the floor plan for the gaming floor.

(b) A gaming facility manager shall not commence electronic gaming operations until the floor plan depicting the facility manager's gaming floor and all restricted areas servicing the electronic gaming operation has been approved in writing by the executive director.

(c) A gaming facility manager shall not change the number, configuration, or location of EGMs on the floor plan approved under subsection (b) without the prior written approval of the executive director.

Kan. Admin. Regs. § 112-107-7

Authorized by K.S.A. 2008 Supp. 74-8772; implementing K.S.A. 2008 Supp. 74-8752 and 74-8772; effective April 24, 2009.