820 Ind. Admin. Code 5-1-27

Current through October 31, 2024

Section 820 IAC 5-1-27 - Equipment controls

Authority: IC 25-8-3-22

Affected: IC 25-8-15.4-14

Sec. 27.

(a) A control or kill switch must be incorporated on each sunlamp product which enables the customer to manually terminate radiation without disconnecting the electrical plug or coming into contact with the ultraviolet lamp.

(b) The electric power supply for each sunlamp product must run through a control or kill switch that will enable the operator to manually terminate the radiation. There must be a clear wide path to the kill switches. There shall be no obstructions of any kind in front of the kill switches, including, but not limited to, a circuit breaker cover, chairs, or any boxes or storage on the floor. The controller kill switch must be outside of the room that contains the sunlamp products.

820 IAC 5-1-27

State Board of Cosmetology and Barber Examiners; 820 IAC 5-1-27; filed Mar 17, 1992, 10:20 a.m.: 15 IR 1380; filed Sep 17, 1998, 3:55 p.m.: 22 IR 459; readopted filed Jul 17, 2001, 9:57 a.m.: 24 IR 4236; readopted filed Jul 19, 2007, 1:01 p.m.: 20070808-IR-820070046RFA; readopted filed November 25, 2013, 9:22 a.m.: 20131225-IR-820130286RFA

Readopted filed 11/27/2019, 3:14 p.m.: 20191225-IR-820190183RFA

Transferred from the Indiana State Department of Health ( 410 IAC 6-13-27) to the State Board of Cosmetology Examiners ( 820 IAC 5-1-27 ) by P.L. 142-1995, SECTION 33, effective July 1, 1995.