Section 75 IAC 3-1-2.1 - DefinitionsAuthority: IC 9-32-3-1
Affected: IC 4-5-1-1; IC 9-13-2; IC 9-22; IC 9-32
Sec. 2.1.
The following definitions apply throughout this article:
(1) "Automotive salvage recycler" has the meaning set forth in IC 9-13-2-10.(2) "Center section" means a body section or clip of a motor vehicle that includes the cowl.(3) "Front end assembly" means the front body section of a motor vehicle consisting of hood, fenders, radiator support, and bumper assembly, as a unit.(4) "Major component parts" has the meaning set forth in IC 9-13-2-95. Those major component parts that have been rebuilt, reconditioned, or restored by a production rebuilder acquiring such parts for refurbishing purposes shall not be subject to the provisions of this rule.(5) "Model year" means the year designated by the manufacturer for production and product identification purposes that is used for titling, registration, and record keeping purposes.(6) "Rear section" means a body section or clip of a motor vehicle, without the cowl, consisting of quarter sections, deck lid, and bumper assembly, as a unit.(7) "Salvage vehicle" has the meaning set forth in IC 9-13-2-160.(8) "Scrap metal processor" has the meaning set forth in IC 9-13-2-162.(9) "Secretary" refers to the secretary of state holding office as set forth in IC 4-5-1-1.(10) "Source vehicle" means a specific vehicle from which a major component part is removed.(11) "Stock number" means the number assigned by the automotive salvage recycler for the purpose of identifying a salvage vehicle or major component part at the respective business.(12) "V.I.N." means the vehicle identification number as placed on the vehicle by the manufacturer or supplied by the bureau of motor vehicles.Secretary of State; 75 IAC 3-1-2.1; filed 12/14/2017, 1:11 p.m.: 20180110-IR-075160433FRAReadopted filed 11/30/2023, 11:48 a.m.: 20231227-IR-075230626RFA