Statutes, codes, and regulations
Indiana Administrative Code
Title 675 - FIRE PREVENTION AND BUILDING SAFETY COMMISSIONArticle 31 - INDIANA AMUSEMENT DEVICE CODE
Rule 675 IAC 31-5 - Technical Requirements
Section 675 IAC 31-5-14 - Assembly

675 Ind. Admin. Code 31-5-14

Download
PDF
Current through December 4, 2024
Section 675 IAC 31-5-14 - Assembly

Authority: IC 22-13-2-8

Affected: IC 22-15-2-7; IC 22-15-7

Sec. 14.

Parts shall be properly aligned and shall not be bent, distorted, cut, or otherwise injured to force a fit. Parts requiring lubrication shall be lubricated in the course of assembly. Fastening and locking devices, such as bolts, cap screws, cotter pins, and lock washers shall be installed where required for dependable operation. Welding of parts upon which safe operation depends (critical components) shall be done by welders certified in accordance with the requirements of the American Welding Society.

675 IAC 31-5-14

Fire Prevention and Building Safety Commission; 675 IAC 31-5-14; filed Apr 3, 1998, 9:30 a.m.: 21 IR 2983; readopted filed Nov 10, 2004, 1:10 p.m.: 28 IR 1072; readopted filed Aug 4, 2010, 8:12 a.m.: 20100825-IR-685100266RFA; readopted filed Oct 11, 2016, 9:08 a.m.: 20161109-IR-685160330RFA
Readopted filed 12/2/2022, 3:31 p.m.: 20221228-IR-675220298RFA

NOTE: Transferred from the Regulated Amusement Device Safety Board (685 IAC 1-5-14) to the Fire Prevention and Building Safety Commission (675 IAC 31-5-14) by P.L. 249-2019, SECTION 16, effective July 1, 2019.