Section 675 IAC 31-2-9 - Standard practice for an amusement ride and device manufacturer quality assurance programAuthority: IC 22-13-2-8
Affected: IC 22-15-2-7; IC 22-15-7
Sec. 9.
(a) That certain document being titled Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices, 2006 edition approved March 1, 2006 (ASTM F1193-06), published by ASTM International, 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959, is hereby adopted by reference as if fully set out in this article save and except those revisions made in this section.(b) Delete subsection 1.2 in its entirety.(c) Delete Section 2 in its entirety.(d) Notwithstanding language to the contrary in the primarily incorporated documents, the version of all secondarily incorporated documents, which are documents referred to in the primarily incorporated documents, shall be the version in effect on September 24, 2009.Fire Prevention and Building Safety Commission; 675 IAC 31-2-9; filed Apr 3, 1998, 9:30 a.m.: 21 IR 2972; readopted filed Nov 10, 2004, 1:10 p.m.: 28 IR 1072; filed Dec 30, 2009, 2:08 p.m.: 20100127-IR-685090147FRA; readopted filed Aug 4, 2010, 8:12 a.m.: 20100825-IR-685100266RFA; readopted filed Oct 11, 2016, 9:08 a.m.: 20161109-IR-685160330RFAReadopted filed 12/2/2022, 3:31 p.m.: 20221228-IR-675220298RFANOTE: Transferred from the Regulated Amusement Device Safety Board (685 IAC 1-2-9) to the Fire Prevention and Building Safety Commission (675 IAC 31-2-9) by P.L. 249-2019, SECTION 16, effective July 1, 2019.