Section 675 IAC 19-4-5 - Section 5 amendmentsAuthority: IC 22-13-2-2
Affected: IC 22-12; IC 22-13; IC 22-14; IC 36-7-2-9
Sec. 5.
Amend Section 5 as follows:
(1) Amend Section 5.1.2.2 to delete everything after the word "construction" and insert "in accordance with the rules of the Commission at 675 IAC 12-4-7".(2) Delete Section 5.1.2.3 in its entirety without substitution.(3) Delete Section 5.2.2 in its entirety without substitution.(4) Delete Section 5.1.4.2 in its entirety without substitution.(5) Delete Section 5.7 in its entirety and substitute as follows: 5.7 Submittals compliance; alternative methods and materials5.7.1 For construction projects filed for which a design professional is required under 675 IAC 12-6-9(a) and where energy conservation details are required by 675 IAC 12-6-7(g)(15), one of the following, sealed and signed by the design professional, shall be submitted: (a) A Compliance Report, from an accepted computer compliance tool such as ComCheck (www.energycodes.gov/comcheck/) or other prescriptive compliance software or other methods approved by the Division, demonstrating compliance with the requirements of the Indiana Energy Conservation Code, 2010 edition (675 IAC 19-4).(b) A report from a comprehensive energy modeling program and an affidavit signed and sealed by the design professional affirming that the tools used to simulate the design energy performance indicate that the submitted design will meet or exceed the requirements of the Indiana Energy Conservation Code, 2010 edition (675 IAC 19-4).5.7.2 For construction projects filed for which a design professional is not required under 675 IAC 12-6-9(a) and where energy conservation details are required by 675 IAC 12-6-7(g)(15), one of the following shall be submitted: (a) A Compliance Report, from an accepted computer compliance tool such as ComCheck ( www.energycodes.gov/comcheck/ ) or other prescriptive compliance software or other methods approved by the Division, demonstrating compliance with the requirements of the Indiana Energy Conservation Code, 2010 edition (675 IAC 19-4).(b) A report from a comprehensive energy modeling program and an affidavit signed and sealed by a registered design professional affirming that the tools used to simulate the design energy performance indicate that the submitted design will meet or exceed the requirements of the Indiana Energy Conservation Code, 2010 edition (675 IAC 19-4).5.7.3 Compliance reports filed to comply with 5.7.1(b) and 5.7.2(b) must be performed by software that complies with the provisions of Appendix G of this rule.Fire Prevention and Building Safety Commission; 675 IAC 19-4-5; filed Apr 6, 2010, 2:55 p.m.: 20100505-IR-675090388FRA; errata filed May 25, 2010, 8:22 a.m.: 20100602-IR-675090388ACA; Readopted filed 10/31/2017, 11:25 a.m.: 20171129-IR-675160329RFAReadopted filed 5/11/2023, 2:22 p.m.: 20230607-IR-675230104RFA