Section 675 IAC 14-4.4-225 - Chapter 44; referenced standardsAuthority: IC 22-13-2-2; IC 22-13-2-2.5; IC 22-13-2-13
Affected: IC 22-12; IC 22-13; IC 22-14; IC 22-15; IC 36-7
Sec. 225.
(a) In the "User note" section change the reference to Section R102.4 to a reference to R101.(b) In the American Architectural Manufacturers Association (AAMA) standards, change the referenced standard "711-16" to read as follows: 711.13: Voluntary Specification for Self-Adhering Flashing Used for Installation of Exterior Wall Fenestration Products R703.4.(c) In the American Society of Civil Engineers/Structural Engineering Institute (ASCE/SEI) standards, change the referenced standard "32-17" to read as follows: 32-01: Design and Construction of Frost-Protected Shallow Foundations R403.1.4.1.(d) In the ICC standards, change the title of the following standards: (1) "IBC-18: International Building Code" to read as follows: Indiana Building Code (675 IAC 13) - Code in effect at time of construction.(2) "IFC-18: International Fire Code" to read as follows: Indiana Fire Code (675 IAC 22) - Code in effect at time of construction.(3) "IFGC-18 International Fuel Gas Code" to read as follows: Indiana Fuel Gas Code (675 IAC 25) - Code in effect at time of construction.(4) "IMC-18 International Mechanical Code" to read as follows: Indiana Mechanical Code (675 IAC 18) - Code in effect at time of construction.(5) "IPC-18 International Plumbing Code" to read as follows: Indiana Plumbing Code (675 IAC 16) - Code in effect at time of construction.(e) In the NFPA standards, change the title of standard "70-17: National Electrical Code" to read as follows: IN Electrical Code (675 IAC 17) - Code in effect at time of construction.Fire Prevention and Building Safety Commission; 675 IAC 14-4.4-225; filed 11/26/2019, 11:43 a.m.: 20191225-IR-675190330FRA