Section 326 IAC 8-1-10 - Compliance certification, record keeping, and reporting requirements for certain coating facilities using compliant coatingsAuthority: IC 13-14-8; IC 13-17-3-4; IC 13-17-3-11
Affected: IC 13-15; IC 13-17
Sec. 10.
(a) This section applies to any coating source that: (1) uses compliant coatings to comply with volatile organic compounds (VOC) emission limits; and(2) meets any of the applicability criteria that follow:(B) 326 IAC 8-5-5(a)(2); or(C) 326 IAC 8-5-5(a)(3)(A).(b) Upon startup of a new coating facility, or upon changing the method of compliance for an existing coating facility from daily-weighted averaging or control devices to the use of compliant coatings, the owner or operator of the coating source identified in subsection (a) shall certify to the department that the coating facility is in compliance with the requirements of this section. The certification shall include the following: (1) The name and location of the source.(2) The name, address, and telephone number of the person responsible for the source.(3) Identification of each VOC emitting coating facility and identification of the applicable emission limitation.(4) The name and identification number of each coating, as applied, used at each coating facility.(5) The mass of VOC (excluding water and exempt compounds) per volume of coating and the volume of each coating, as applied.(c) By May 1, 1997, or upon startup of a new coating facility, or upon changing the method of compliance for an existing coating facility from daily-weighted averaging or control devices to the use of compliant coatings, the owner or operator of a coating facility identified in subsection (a) shall for each coating facility and for each coating used collect and record each day and maintain all of the following information: (1) The name and identification number of each coating, as applied.(2) The mass of VOC (excluding water and exempt compounds) per volume of coating for each coating, as applied, or the VOC content of each coating, as applied, expressed in units necessary to determine compliance.(3) As new compliant coatings are added to a coating facility, the records required by this subsection shall be updated to include the new coating.(4) If use of a coating is discontinued, the records required by this section shall be maintained consistent with section 9(c) of this rule.(d) By May 1, 1997, the owner or operator of a coating facility identified in subsection (a) shall notify the department in either of the following instances:(1) Any record showing use of any noncompliant coatings shall be reported by submitting a copy of the record to the department within thirty (30) days following use; such record shall also be submitted with the quarterly compliance report. The following information shall accompany each submittal: (A) Name and location of the coating facility.(B) Time, date, and duration of the noncompliance.(C) Corrective action taken.(2) At least thirty (30) calendar days before changing the method of compliance from the use of compliant coatings to daily-weighted averaging or control devices, the owner or operator shall comply with all requirements of section 11(b) or 12(b) of this rule, respectively. Upon changing the method of compliance for a coating facility from the use of compliant coatings to daily-weighted averaging or control devices, the owner or operator shall comply with all requirements of section 11 or 12 of this rule, respectively.Air Pollution Control Board; 326 IAC 8-1-10; filed Apr 22, 1997, 2:00 p.m.: 20 IR 2318