326 Ind. Admin. Code 20-48-2
Current through October 23, 2024
Authority: IC 13-14-8; IC 13-15-2-1; IC 13-17-3-4; IC 13-17-3-11
Affected: IC 13-17-3
Sec. 2.
In addition to alternative organic HAP content requirements for open molding resin operations contained in Table 2 to Subpart VVVV, 40 CFR 63 *, the alternative HAP content requirements for gel coat operations are as follows:
| Gel Coat Application | ||
| You must not exceed this weighted-average percent organic HAP content (weight percent) | ||
| For this operation | And this application method | requirement |
| Pigmented gel coat operations | Atomized (spray) | 33 percent |
| Clear gel coat operations | Atomized (spray) | 48 percent |
| Tooling gel coat operations | Atomized (spray) | 40 percent |
| Pigmented gel coat operations | Nonatomized (nonspray) | 40 percent |
| Clear gel coat operations | Nonatomized (nonspray) | 55 percent |
| Tooling gel coat operations | Nonatomized (nonspray) | 54 percent |
*These documents are incorporated by reference. Copies may be obtained from the Government Printing Office, 732 North Capitol Street NW, Washington, D.C. 20401 or are available for review and copying at the Indiana Department of Environmental Management, Indiana Government Center-North, Tenth Floor, 100 North Senate Avenue, Indianapolis, Indiana 46204.
326 IAC 20-48-2