Section 312 IAC 29-28-1 - Operating requirements for a Class II wellAuthority: IC 14-10-2-4; IC 14-37-3
Affected: IC 14-37
Sec. 1.
(a) An owner or operator shall obtain written authorization from the division under this rule to operate a Class II well. (b) Written authorization to inject shall be issued after the owner or operator has submitted to the division the following: (1) A completion report showing the well has been constructed as a Class II well in accordance with the permit issued under 312 IAC 29-5.(2) An analysis of the injection fluid in accordance with section 7 of this rule.(3) Certification that the well meets the requirements for external mechanical integrity under section 4 of this rule, verified by either of the following:(B) Other measures specified in section 4(c)(1) through 4(c)(6) of this rule.(4) Certification that the well has passed an internal mechanical integrity test in accordance with section 2 of this rule.(c) The division director may require additional testing or special equipment if appropriate to the protection of an underground source of drinking water.Natural Resources Commission; 312 IAC 29-28-1; filed 12/1/2017, 10:35 a.m.: 20171227-IR-312160230FRAReadopted filed 1/17/2023, 1:53 p.m.: 20230215-IR-312220328RFA