Statutes, codes, and regulations
Illinois Administrative Code
Title 62 - MININGPart 240 - THE ILLINOIS OIL AND GAS ACT
Subpart G - WELL CONSTRUCTION, OPERATING AND REPORTING REQUIREMENTS FOR CLASS II UIC WELLS
Section 240.730 - Surface and Production Casing Requirements for Existing Class II UIC Wells

Ill. Admin. Code tit. 62 § 240.730

Download
PDF
Current through Register Vol. 48, No. 48, December 2, 2024
Section 240.730 - Surface and Production Casing Requirements for Existing Class II UIC Wells
a) Surface Casing

For existing Class II UIC wells which do not have surface casing completely covering the fresh water zone, further cementing is not required unless it is necessary to establish external mechanical integrity in accordance with Section 240.770.

b) Production Casing

The top of the cement behind the production casing shall be a sufficient distance above the top of the uppermost permitted interval of injection to prevent upward migration of injected fluid. In determining the sufficiency of cement, the Department shall consider the amount of existing cement, the location of the packer and the injection pressure.

Ill. Admin. Code tit. 62, § 240.730

Added at 15 Ill. Reg. 15493, effective October 10, 1991