Ill. Admin. Code tit. 35 § 739.162

Current through Register Vol. 48, No. 49, December 6, 2024

Section 739.162 - Notification

a) Identification Numbers. A used oil burner that has not previously complied with the notification requirements of RCRA section 3010 must comply with these requirements and obtain a USEPA identification number pursuant to RCRA section 3010 and an Illinois special waste identification number.

b) Mechanics of Notification. A used oil burner that has not received a USEPA identification number may obtain one by notifying the Agency of its used oil activity by submitting either of the following:

1) A completed Notification of RCRA Subtitle C Activities (Site Identification Form) (USEPA Form 8700-12) to the Agency; or

BOARD NOTE: USEPA Form 8700-12 is available from the Agency, Bureau of Land (217-782-6762). It is also available on-line for download in PDF file format: www.epa.gov/hwgenerators/instructions-and-form-hazardous-waste-generators-transporters-and-treatment-storage-and.

2) A letter to the Agency requesting a USEPA identification number. The letter should include the following information:

A) The burner company name;

B) The owner of the burner company;

C) The mailing address for the burner;

D) The name and telephone number for the burner point of contact;

E) The type of used oil activity; and

F) The location of the burner facility.

c) A used oil burner that has not previously obtained an Illinois special waste identification number may obtain one by contacting the Agency at the following address: Division of Land Pollution Control, Illinois EPA, 1021 North Grand Avenue, Springfield, Illinois 62794-9276 (217-782-6761).

Ill. Admin. Code tit. 35, § 739.162

Amended at 37 Ill. Reg. 17963, effective October 24, 2013

Amended at 43 Ill. Reg. 6101, effective 5/2/2019