Ill. Admin. Code tit. 35 § 217.244

Current through Register Vol. 48, No. 43, October 25, 2024

Section 217.244 - Emissions Limitations

a) On and after January 1, 2015, no person shall cause or allow emissions of NO_x into the atmosphere from any reheat furnace, annealing furnace, or galvanizing furnace used in iron and steel making to exceed the following limitations. Compliance must be demonstrated with the applicable emissions limitation on an ozone season and annual basis.

Emission Unit Type	No_x Emissions Limitation (lb/mmBtu)
Reheat furnace, regenerative	0.18
Reheat furnace, recuperative, combusting natural gas	0.09
Reheat furnace, recuperative, combusting a combination of natural gas and coke oven gas	0.142
Reheat furance, cold-air	0.03
Annealing furnace, regenerative	0.38
Annealing furnace, recuperative	0.16
Annealing furance, cold-air	0.07
Galvanizing furnace, regenerative	0.46
Galvanizing furnace, recuperative	0.16
Galvanizing furnace, cold air	0.06

b) On and after January 1, 2015, no person shall cause or allow emissions of NO_x into the atmosphere from any reverberatory furnace or crucible furnace used in aluminum melting to exceed the following limitations. Compliance must be demonstrated with the applicable emissions limitation on an ozone season and annual basis.

Emission Unit Type	No_x Emissions Limitation (lb/mmBtu)
Reverberatory furnace	0.08
Crucible furnace	0.16

Ill. Admin. Code tit. 35, § 217.244

Amended at 35 Ill. Reg. 14627, effective August 22, 2011