Current through September 2, 2024
Section 39.03.49.400 - MANDATORY OPERATIONAL FEATURESNotwithstanding other provisions of this rule, a certified device must comply with the following:
01.Device Setpoint. The setpoint of each device to interlock when the breath sample is provided point zero two five (.025) or greater (Section 18-8008(2), Idaho Code). The capability to change this setting shall be made secure, by the manufacturer, to prevent unauthorized adjustment of the device.02.Camera. Every device currently installed in a vehicle must be equipped with a camera that is not located inside the handset and is mounted to the vehicle in such a way to capture a reference photo at the time of installation and a digital image of the driver sitting in the driver's compartment when a breath sample is submitted, refused, or the device is circumvented. The de-vice must store all data, including the image, time, date, and BrAC of the accepted breath sample each time the individual attempts to use the device. a. The device camera must function in all lighting conditions.b. All images and data collected between calibration periods must be stored in the device's data storage system and be downloadable at the time of calibration by the device manufacturer or manufacturer's representative in order to ensure proper record maintenance.Idaho Admin. Code r. 39.03.49.400