Section 24.39.40.002 - ADOPTION AND INCORPORATION BY REFERENCE01.Documents. The following codes, amendments, and updates are hereby adopted and incorporated by reference into these rules for all conveyances subject to this chapter.a. ANSI/ASME A17.1 2016, Safety Code for Elevators and Escalators with the following exceptions: i. Compliance with section 2.8.3.3.2 requires that the means for disconnecting the main power, as required by this section, to be within sight of controller for all conveyances with an elevator machine room or control room.ii. Compliance with section 8.11.2.1.5(c) Car and Counterweight Buffer testing must be conducted at slow speed in accordance with Item 5.9.2.1(a) in ANSI/ASME A17.2 2014.iii. Compliance with Section 2.2.2.5, which requires a sump pump or drain in the elevator pit, is optional. If a sump pump or drain is installed, it must meet the requirements of this section. A sump with a cover must be provided in each elevator pit.b. ANSI/ASME A17.3 2015 Safety Code for Existing Elevators and Escalators.c. ANSI/ASME A17.4 1999 Guide for Emergency Personnel.d. ANSI/ASME A17.5 2014 Elevator and Escalator Electrical Equipment.e. ANSI/ASME A17.6 2010 Standard for Elevator Suspension, and Governor Systems.f. ANSI/ASME A17.7 2012 Performance-based Safety Code for Elevators and Escalators.g. ANSI/ASME A17.8 2016 Standard for Wind Tower Turbine Elevators.h. ICC/ANSI A117.1 2009 Accessible and Usable Buildings and Facilities.i. ANSI/ASME A18.1 2014 Safety Standards for Platform Lifts and Chairlifts.j. ASME QE-1 2013 Standard for the Qualification of Elevator Inspectors.02.Copies. Copies of the codes, amendments, and updates listed in Subsection 004.01 of these rules are available for review at the Division of Building Safety offices.Idaho Admin. Code r. 24.39.40.002