Section 6-77-110 - Customer meter installations: operating pressure(a) A meter may not be used at a pressure that is more than sixty-seven percent of the manufacturer's shell test pressure.(b) Each newly installed meter manufactured after November 12, 1970, must have been tested to a minimum of 10 p.s.i.g.(c) A rebuilt or repaired tinned steel case meter may not be used at a pressure that is more than fifty percent of the pressure used to test the meter after rebuilding or repairing.[Eff ] (Auth: HRS § 269-6) (Imp: 49 C.F.R. §192.357, OCT 1, 1990)