Section 4-66-39 - Special local need; label, packaging and coloration requirements(a) The head shall review the proposed labeling submitted with the application to determine compliance subject to the following* requirements: (1) A copy of the final printed labeling shall be reviewed by the head as soon as practicable after a registration is issued in order to verify compliance;(2) A new product registered shall be accompanied, at the time of use, by labeling meeting all applicable criteria of sections 4-66-4 to 4-66-31. New product labeling shall also contain a statement identifying "For distribution and use only within the State of Hawaii" and the assigned special local need number.(3) For a registration of an additional use of a federally registered product, labeling from the federally registered product shall be accompanied at the time of use by supplemental labeling that contains: (A) A statement identifying "For distribution and use only within the State of Hawaii";(B) Directions for use to meet the special local need which satisfy the criteria of sections 4-66-10 to 4-66-31;(C) The trade name of the product;(D) The name and address of the special local need registrant;(E) The EPA registration number of the federally registered product;(F) The assigned special local need number;(G) A statement requiring a person using the product to comply with all applicable directions, restrictions, and precautions found in the labeling of the federally registered product; and(H) A statement prohibiting the use of the product in a manner inconsistent with federal and accompanying supplemental labeling.(4) If the head classifies for restricted use a product or product use registered by the head, which is not required to be classified as restricted use by section 4-66-32, then the head shall require supplemental labeling for the product or product use to have additional appropriate precautions, and a statement that the product or product use is for restricted use.(b) All products registered by the head shall meet all appropriate federal packaging standards as well as all appropriate standards for coloration established and contained in section 4-66-42.1. Prior to issuing any registration, the head shall determine that the product conforms to these requirements.[Eff. 7/13/81; am and comp DEC 16 2006] (Auth: HRS §§ 149A-19, 149A-22, 149A-33, 7 USC § 136v(c), 40 CFR § 162.153 ) (Imp: HRS §§ 149A-19, 149A-22, 149A-33, 7 USC § 136v(c), 40 CFR § 162.153 )