Rule 480-50-.04 - Numbered Inner-Liner Requirements(1) A numbered inner-liner shall meet the following requirements: (a) The inner-liner shall be waterproof, tamper-evident, and tear-resistant;(b) The inner-liner shall be removable and sealable immediately upon removal without emptying or touching the contents;(c) The contents of the inner-liner shall not be viewable from the outside when sealed;(d) The size of the inner-liner shall be clearly marked on the outside of the liner (e.g., 5-gallon, 10-gallon, etc.); and(e) The inner-liner shall bear a permanent, unique identification number that enables the inner-liner to be tracked.(2) Access to the inner-liner shall be restricted to authorized employees for the collector.(3) The inner-liner shall be sealed by two authorized employees immediately upon removal from the permanent outer container, and the sealed inner-liner shall not be opened, x-rayed, analyzed, or otherwise penetrated.(4) The authorized collector shall maintain a sequential log of all numbered inner-liners. The log shall indicate, at a minimum: (a) If the Inner-liner has been placed in a receptacle;(b) If the Inner-liner has been damaged and rendered not usable;(c) If the Inner-liner has been sealed and removed from the receptacle;(d) The names of the collector employees sealing and removing the inner-liner from the collector; and(e) The date and name of the reverse distributor, and authorized representative, by which the inner-liner was removed from the collector's facility.Ga. Comp. R. & Regs. R. 480-50-.04
O.C.G.A. §§ 16-13-45, 26-3-7, 26-3-16, 26-4-27, 26-4-28, 26-4-29, 26-4-87, 26-4-112, Pub. L. 111-273.
Original Rule entitled "Numbered Inner-Liner Requirements" adopted. F. Jan. 20, 2016; eff. Feb. 9, 2016.